support > Skip Navigation LinksHome > Support > Support Download(BIOS)
TYAN (S7016)
Skip Navigation Links

| How to Flash |

TYAN makes no warranties to the usability of a BIOS on our website and are made available to the public on an "as-is" basis. Upgrading a BIOS without knowing the implications may cause serious adverse affects. Please do not upgrade a BIOS unless directed to do so by a qualified support technician. TYAN is not able to replace mis-used or damaged BIOS chips in the event of a BIOS flash failure. Please contact your dealer for replacements or warranty service.



Date Filename Version
2011/03/16 S7016_v301 v3.01
Problem Fix Description:

- Set ICH10 GP11 to GPO High for isolating signal SMBAlert#
- Fixed an issue where the system would sound an error beep code when exiting and saving changes from the BIOS Setup Menu
- Fixed a SLES 11 would fail install on a LSI 8888ELP Raid Card when PCIE Max Payload size = 256 Byte
- Updated MRC Code to p2.91
- Updated CPU Microcode
- Implemented Intel errata #41
- Added SMBIOS Type11 and Type12

2010/05/20 S7016_v300 v3.00

Problem Fix Description:

- Updated CPU Microcode
- Updated SMBIOS

2010/04/27 S7016_v103 v1.03

Problem Fix Description:

- Updated Intel ICH10R Option ROM to v8.9.1.1002

2010/03/18 S7016_v102 v1.02

Problem Fix Description:

- Add support for DDR3 low voltage memory
- Fixed an issue where Turbo mode would not work correctly when TPM was enabled
- Fixed an issue where the system would Kernel Panic during Linux reboot test
- Fixed an issue where system could not boot to a SATA CD-ROM while in AHCI mode
- Fixed an issue where the timestamp is abnormal during first Power On
- Updated Intel MRC code to v2.70
- Added Intel Westmere CPU support

*Note: If you are using Intel Westmere CPU’s, you must use bios v102 or higher. Any previous bios will cause system to NO POST when Westmere CPU’s are installed

2009/09/22 S7016_v101 v1.01

Problem Fix Description:

- Fixed a problem with the BMC event log during initial power on
- Fixed an issue where a USB mouse couldn’t work under DOS
- Fixed issue where the onboard LAN’s did not show up properly during POST
- Added Gateway IP BIOS setup item in the IPMI LAN Configuration section
- Fixed an issue where 1TB sized HD’s did not properly display their size
- Fixed an issue where the IPMI Device was not properly installed in Windows Server 2008
- Fixed an issue where a 3Ware 9690SA-8I PCI-E SAS Option ROM would not initialize properly
- Fixed a DDR3 Thermal Sensor Location Error
- Fixed a i82576 PXE Enable failure
- Updated ME Firmware
- Added SGPIO support

2009/05/22 S7016_v100.zip v1.00

New features and Fixes :

* This is the first release BIOS.