support > Skip Navigation LinksHome > Support > Support Download(BIOS)
Thunder h2000M (S3992)
Skip Navigation Links

| How to Flash |

TYAN makes no warranties to the usability of a BIOS on our website and are made available to the public on an "as-is" basis. Upgrading a BIOS without knowing the implications may cause serious adverse affects. Please do not upgrade a BIOS unless directed to do so by a qualified support technician. TYAN is not able to replace mis-used or damaged BIOS chips in the event of a BIOS flash failure. Please contact your dealer for replacements or warranty service.

Date Filename Version
2008/11/19 S3992_v205 v2.05

Problem Fix Description:

- Updated AMD AGESA code to v3.3.0.0
- Updated Hardware Monitor to show N/A for CPU2 Temperature when the CPU isn't installed
- Enabled NCQ functionality

2008/07/22 v.2.04
Problem Fix Description:
- Fixed an issue where you could not create a RAID 5 array*
- Updated bios boot order to make the Broadcom PXE Option ROM boot first if there were other onboard Option ROM’s present
- Forced the SATA RAID to load second if the bios detects that SATA RAID was enabled in the bios
* must use the latest Ciprico SATA RAID drivers (v4.1.1) available from the Tyan website

2008/05/13 v.2.03

Problem Fix Description:


* Updated AGESA code to v3.1.8.0

* Added USB keyboard check when “Keyboard Error Report” is set to [Enable]

* Fixed a HDD size display error during the summary screen if HDD is larger than 1TB in size
* Update the ATI ES1000 firmware to v008.005.033.000
* Fixed an issue with Server 2008 where it wouldn’t properly load the SATA driver in SATA mode
* Fixed a latency timer issue for the PCI-E x8 slot
* Fixed an issue where a 3ware 9650 firmware wouldn’t show up properly during POST
* Fixed an issue where the system would not generate a No Memory beep code when no memory was present

2007/11/19 S3992_v202 v2.02
TYAN Thunder h2000M (S3992) BIOS V2.02
New features and Fixes :
* Updated to AGESA code v
* Added a Warning Beep when onboard VGA is disabled
* Fixed "A Hyper Transport sync flood error occurred on last boot" warning message

2007/09/12 S3992_v201 v2.01
TYAN Thunder h2000M (S3992) BIOS V2.01
New features and Fixes :
* Updated to AGESA code v3.1.1.0
* Added AMD Quad Core CPU Support
* Updated the SATA OP-ROM to v3.0.0015.8
* Added support for 1TB sized SATA devices
* Added an auto detect function for the Tyan Taro M7901/M7902 cards during POST
* Added the ability to provide memory beep codes in case system does not POST

2007/06/01 s3992_200 v2.00
TYAN Thunder h2000M (S3992) BIOS V2.00
New features and Fixes :
* Updated AGESA bios code to v3.0.7
* Set AMD PowerNow! defalut to [Enable]
* Set "ECC Mode" default to [Good]
* Added "Board ID" to the "Advanced->Device & PCI Slots Configuration" section of the bios
* Added "Node Interleaving" option in "Chipset->NorthBridge Configuration->Memory Configuration"
   and set default to [Disable]
* Added HPET Function*
* Added Power fail resume option*
* Fixed Solaris 10 update2,update3 install issue
* Functions only available for certain REV's of motherboards

2007/03/09 s3992_104 v1.04

TYAN Thunder h2000M (S3992) BIOS V1.04
New features and Fixes :
* Update SCSI Option ROM to v4.30 for updated M7901/M7902 support
* Add SCSI/HostRAID switch setup option in BIOS Setup Utility
   (Advanced> Device & PCI Slots Configuration> Onboard M7901/M7902)
* Update CPU1 CPU2 HT link initially to dissolve POST 3Ah possibility
* Added Keyboard Error Report Eventlog [Enable/Disable] Option in Boot Settings Configuration
* Fixed Solaris 10 update1 install IDE issue
* Updated Opteron CPU support

2007/01/04 s3992_103 v1.03

TYAN Thunder h2000M (S3992) BIOS V1.03
New features and Fixes :
* Update ATi ES1000 VGA Option ROM to v008.005.028.000
* Fixed an issue where some LCD monitors would not work properly because default settings would 
   put the image Out of Range
* Added BIOS option [SATA ROM] to boot selection to support SATA DVD/CDROM devices
* Fixed an error message (Error attaching device data) during linux boot message log

2006/09/22 s3992_102 v1.02

TYAN Thunder h2000M (S3992) BIOS V1.02
New features and Fixes :
* Fixed a USB floppy driver installation error during Windows installation
* Fixed DMI data can not updated using DMI tool
* Fixed a smbus conflict with the M3291
* Fixed a system hang if there is not enough shadow RAM for PXE booting
* Correcting CPU Node1 ECC Scrub setting

2006/09/13 s3992_101 v1.01

TYAN Thunder h2000M (S3992) BIOS V1.01
New features and Fixes :
* Added Endless boot support
* Added DRAM Parity error report
* Added error beep if no DIMMs are present
* Added SMDC M3291 support
* Enabled MSI (Message Signaled Interrupts ) functionality
* Corrected the Auto FAN functionality
* Improved legacy USB compatibility
* Fixed system hang if  there is not enough shadow RAM for PXE booting
* Fixed an issue where the FAN Fail LED auto light up after shutdown
* Fixed CPU1 Vdimm Voltage value error
* Fixed a SATA HDD recognition issue in the RAID HDD boot menu
* Updated HT1000 RAID Option ROM vRC-210-2006044.3
* Updated CPU and Memory module support

2006/09/05 s3992_100 v1.00

TYAN Thunder h2000M (S3992) BIOS V1.00
New features and Fixes :
* This is the first BIOS release