| System | Form Factor | 4U Rackmount |
| Gross Weight | 28 kg |
| Chassis Model | FT68 |
| Dimension (D x W x H) | 27.52" x 17.44" x 6.9" (688 x 436 x 175mm) |
| Motherboard | S7910WGM2NR-2T |
| Board Dimension | Prop. 21.47" x 16.65" (545.5 x 423mm) |
| Front Panel | Buttons | (1) RST / (1) ID / (1) PWR w/ LED |
| LEDs | (1) HDD / (3) LAN / (1) Alert |
| External Drive Bay | Type / Q'ty | (32) 2.5" Hot-Swap SAS / SATA HDD trays |
| HDD backplane support | SAS / SATA 6.0Gb/s |
| Internal Drive Bay | Type / Q'ty | (1) 2.5" fixed (optional) |
| System Cooling Configuration | FAN | (3+3) 12cm redundant fans |
| Power Supply | Type | ERP1U |
| Efficiency | PFC / 80 plus gold |
| Redundancy | 1+1 |
| Serviceability | Hot-swap |
| Input Range | AC 100-127V/12.9A / AC 200-240V/9.5A |
| Frequency | 47 - 63 Hertz |
| Output Watts | 1600 Watts Max. (only for 200-240V AC) |
| Processor | Supported CPU Series | Intel Xeon Processor E5-4600 Series |
| Socket Type / Q'ty | (4) / LGA2011 |
| Thermal Design Power (TDP) wattage | Max up to 135W |
| System Bus | Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath Interconnect (QPI) support |
| Chipset | PCH | Intel C602 |
| Memory | Supported DIMM Qty | (8)+(8)+(8)+(8) DIMM slots |
| DIMM Type / Speed | DDR3/DDR3L 800 / 1066 / 1333 / 1600 RDIMM, 800 / 1066 / 1333 UDIMM / LRDIMM / Support DDR3 Unbuffered and Register ECC |
| Capacity | Up to 1024GB RDIMMs |
| Memory channel | 4 Channels per CPU |
| Memory voltage | 1.5V or 1.35V |
| Expansion Slots | PCI-E | (6) FH/FLPCI-E Gen.3 x16 slots / (2) FH/FLPCI-E Gen.3 x8 slots |
| Pre-install TYAN Riser Card | M7910-R56-3F1L, PCI-E x16 & x8 4U riser card (right) / M7910-L56-3F1L, PCI-E x16 & x8 4U riser card (left) |
| LAN | Port Q'ty | (2) 10GbE ports + (1) dedicated for IPMI |
| Controller | Intel X540-AT2 |
| PHY | Marvell 88E1111 |
| Storage | SAS | Controller | LSI SAS2308 |
| Speed | 6.0 Gb/s |
| RAID | RAID 0/1/10 |
| SATA | Connector | (2) SATA-DOM; (2) mSATA |
| Controller | Intel C602 |
| Speed | 6.0 Gb/s (SATA-DOM); 3.0 Gb/s (mSATA) |
| RAID | Non-support |
| Graphic | Connector type | D-Sub 15-pin |
| Resolution | Up to 1920x1200 @60Hz |
| Chipset | Aspeed AST2300 |
| I/O Ports | USB | (4) ports (4 at rear) |
| COM | (1) DB-9 COM port |
| VGA | (1) D-Sub 15-pin port |
| RJ-45 | (3) ports (1 port shared with IPMI) |
| System Monitoring | Chipset | Aspeed AST2300 |
| Voltage | Monitors voltage for CPU, memory, chipset & power supply |
| Temperature | Monitors temperature for CPU & system environment |
| LED | Fan fail LED indicator / Over temperature warning indicator |
| Others | Chassis intrusion detection / Watchdog timer support |
| Server Management | Onboard Chipset | Onboard Aspeed AST2300 |
| AST2300 IPMI Feature | IPMI 2.0 compliant baseboard management controller (BMC) / USB 2.0 virtual hub / BIOS update |
| AST2300 iKVM Feature | 24-bit high quality video compression / 10/100 Mb/s MAC interface |
| BIOS | Brand / ROM size | AMI / 32MB |
| Feature | Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3 /PXE boot / ACPI 2.0 power management /Power on mode after power recovery / User-configurable H/W monitoring / Auto-configurable of hard disk types |
| Operating System | OS supported list | Please refer to our Intel OS supported list. |
| Regulation | FCC (DoC) | Class A |
| CE (DoC) | Yes |
| Operating Environment | Operating Temp. | 10° C ~ 35° C (50° F~ 95° F) |
| Non-operating Temp. | - 40° C ~ 70° C (-40° F ~ 158° F) |
| In/Non-operating Humidity | 90%, non-condensing at 35° C |
| RoHS | RoHS 6/6 Compliant | Yes |
| Package Contains | Barebone | (1) FT68B7910 Barebone |
| Heatsink / Cooler | (4) Socket R CPU heatsinks |
| Rail kit | (1) sliding rail kit for FT68 |
| Manual | (1) Quick Ref. Guide |
| Installation CD | (1) TYAN installation CD |
| Cable | Power Cord | (2) CCBL-0310, US type power cord / (2) CCBL-0300, EU type power cord |