PRODUCTS > Skip Navigation LinksHome > Products > Accessories > Accessories Specifications


SMDC (IPMI) Product

M3291 (EOL)

Compatible with



Baseboard Management Controller (BMC)
 • Renesas H8 2167
Protocols and Standards
 • Tailored for IPMI 2.0 compliance
 • RMCP (Remote Management and Control
     Protocol) & RMCP+ (RMCP Plus)
 • Alert Standard Forum (ASF)

* NOTE: RMCP+ can encrypt confidential remote configuration of parameters such user passwords and transfer of sensitive payload data over SOL.
Enhanced Authentication
 • New algorithms provide more robust key
    exchange process
Primary Communication Interface
 • Keyboard Controller Style (KCS)
Auxiliary Communication Interface
 • Intelligent Platform Management Bus (IPMB)
 • Local Area Network (LAN)
Auxiliary SMBus / I2C buses
 • 4 dedicated and independent buses available
     for user expansion
Sensor Monitoring
 • Voltage
 • Temperature
 • Tachometers
 • Fan Speed Control / PWM
 • Chassis Intrusion
Field Replaceable Unit (FRU)
 • Chassis, motherboard, product, and other
     information stored and secured in FRU

Form Factor
 • 3.956" x 2.375" (100.48mm x 60.325mm)
 • Low profile PCI form factor tailored to allow
    different mounting varieties
     - Fits on PCI slot
     - Fits in 3.5" drive bay
     - Fits inside almost any chassis .

Control Command Set
 • Power Up / Power Down
 • System Reset
 • System Power Cycle
 • System NMI
Diagnostic Command Set
  • Power-Good Detection
 • CPU Voltage Identification (VID)
 • ACPI State Detection
 • Request Message Redirection through IPMB
Sensor Data Repository (SDR)
 • Detailed sensor information, including sensor
 • types and measuring units
System Event Log (SEL)
 • Complete history of system events, such as POST
 • events, are stored in non-volatile memory
Platform Event Filtering (PEF)
 • Provide a mechanism for configure the BMC to
   take selected actions on event messages that it
   receives or internally generated. These actions
   include operations such as power-off, sys. reset,
   as well as SNMP Trap
Card Interface
 • Proprietary 50-pin interface
     (2x25 header, 2mm x 2mm)
Additional Features
 • Firmware-upgradeable through flash utility
 • Front Panel LED and Buzzer interface/control

Firmware Firewall
 • Restrict the ability to execute certain commands
      or functions from a given interface