|
Date |
Filename |
Version |
|
|
|
2012/04/18 |
S7010_v303
|
V3.03 |
Description:
- ME Firmware updated from 01.01.00.004.0 to 01.01.02.007.0
- Fixed that system hung up at POST 37h when it did not detect BMC
- Fixed issue that TPM could not be enabled under Linux.
- Fixed issue that USB Keyboard could not work after hot plugged via ELECOM KVM switch
- Fixed issue that SMBAlert bit was reversed. |
|
|
|
|
2011/11/23 |
S7010_v302
|
v3.02 |
Problem Fix Description:
- Updated PXE ROM to v1.3.38
- Updated Intel Software RAID oprion ROM to v10.1.0.1008 for SATA3 HDD issue.
- Fixed up that 3TB HDD size is incorrect in the AHCI mode
- Microcode Update :
1. Nehalem-EP(D0)
2. Westmere-E(B1)
- Updated VGA BIOS to V0.92.2A |
|
|
|
|
2010/12/06 |
S7010_v301
|
v3.01 |
Problem Fix Description:
- Fixed an issue with the BMC not waking up properly from S3 wait state
- Updated AST2050 VGA BIOS to v0.90.7A
- Fixed an issue where the BIOS would hang during POST (2Ah) when a Riser Card is installed
- Updated MRC Code to p2.91
- Updated CPU Micro Code
- Fixed an issue where SLES 11 would not install to a HDD located on a LSI 8888ELP when PCIE Max_Payload_size = 256Byte.
- Added SMBIOS Type11 and Type12
Note: AST2050 VGA bios v0.90.7a requires updated Aspeed VGA driver v9.00.7 |
|
|
|
|
2010/05/27 |
S7010_v300
|
v3.00 |
New features and Fixes :
- Updated CPU Microcode
- Updated SMBIOS |
|
|
|
|
2010/04/23 |
S7010_v206
|
v2.06 |
Problem Fix Description:
- Fixed an issue where a GTX295 PCIe VGA card gave a Code 12 issue under Vista 64-bit
- Updated Intel ICH10R Option ROM to v8.9.1.1002
- Fixed an issue where Seagate SATA HDD's would not function correctly under I/O Meter
- Updated SMBIOS data
- Updated Intel MRC code to v2.7
- Added Intel Westmere CPU support |
|
|
|
|
2010/03/12 |
S7010_v204
|
v2.04 |
Problem Fix Description:
- Add support for DDR3 low voltage memory
- Added 30 sec to BMC response time
- Added VLAN support options in BIOS
- Updated Intel MRC code to v2.20
- Added Intel Westmere CPU Support
- Fixed an issue where USB2 port would not function correctly
*Note: If you are using Intel Westmere CPU’s, you must use bios v204 or higher. Any previous bios will cause system to NO POST when Westmere CPU’s are installed |
|
|
|
|
2009/12/14 |
S7010_v202
|
v2.02 |
Problem Fix Description:
- Fixed an issue the system would kernel panic or hang during a Linux reboot test
- Fixed an issue where you could not boot from a CD-ROM when LSI 1068e was enabled
- Fixed an issue where you could not boot from a CD-ROM when the Intel AHCI was enabled
- Fixed an issue where the timestamp was abnormal during first AC power on attempt
- Added VLAN feature to bios settings
- Fixed an issue where Turbo mode would not function correctly when TPM was set to [Enable]
- Fixed an issue where the L5518 would not show the correct number of cores
- Fixed an issue where the L5518 would not allow you to boot to an OS
- Fixed an issue where the BMC would create abnormal event logs during first AC power on attempt
- Fixed a TLB error under WinXP/Server 2003 64-bit |
|
|
|
|
2009/08/21 |
S7010_v201
|
v2.01 |
Problem Fix Description:
- Updated the port numbering for SATA ports in the bios
- Fixed an issue where CentOS 5.1 would not shut down properly
- Updated the Crystal Beach DMA and DCA bios settings |
|
|
|
|
2009/07/17 |
S7010_v200
|
v2.00 |
Problem Fix Description:
- Fixed an issue where the IPMI drivers would not work properly
- Fixed an issue where the Console Redirection After BIOS POST [Boot Loader] would not work properly
- Fixed an issue so that the system FANs duty cycle will properly retrieve information from "PWM Minimal Duty
Cycle[30%/45%/60%]"
- Updated the Hardware Monitoring section of the bios to report the temperature of memory module for each channel
- Updated the bios so that the LAN IP address can be adjusted directly under BIOS setup |
|
|
|
|
2009/04/24 |
S7010_v101
|
v1.01 |
Problem Fix Description:
- Updated I/O Virtualization support
- Updated Intel MRC to v1.3
- Fixed an issue when the WLED always stayed illuminated when system first power on
- Added I/O Virtualization support
- Fixed an issue where some VGA cards would delay initialization during POST
- Fixed an issue where you couldn't wake up from a S3 wait state by USB Mouse or Keyboard
- Fixed a BMC event log listing for temperature and voltage readings
- Updated CPU Micro code |
|
|
|
|
2009/04/10 |
S7010_v100d_beta
|
v1.00d beta |
Problem Fix Description:
- Fixed an issue when the WLED always stayed illuminated when system first power on
- Added I/O Virtualization support
- Fixed an issue where some VGA cards would delay initialization during POST
- Updated Intel MRC code
- Fixed an issue where you couldn't wake up from a S3 wait state by USB Mouse or Keyboard
- Fixed a BMC event log listing for temperature and voltage readings
- Updated CPU Micro code |
|
|
|
|
2009/03/31 |
S7010_v100
|
v1.00 |
New features and Fixes :
* This is the first release BIOS. |
|
|
|