|
Date |
Filename |
Version |
|
|
|
2012/06/19 |
s7025_v109A
|
v1.09A Beta |
Description:
- Based on V1.09
- Added support for 64bit BAR
- Added support for the HDA controller after it had been mistakenly removed from BIOS release 1.09 |
|
|
|
|
2012/05/22 |
S7025_v109
|
v1.09 |
Description:
- Update microcode for Westmere-EP to 014
- Update MRC code
- Do not assign IO resource to NIC PXE when its option rom is disabled under Setup to avoid IO shortage.
- Fix ahci setup menu shows incorrect sizes for hard drives.
- Update USB module for KVM switch hungup issue.
- Rollback onboard sata raid op-rom to support SATA3 HDD.
- Change the AHCI module for SATA DVDROM issue. |
|
|
|
|
2011/07/27 |
S7025_v108
|
v1.08 |
Problem Fix Description:
- Updated Intel Xeon CPU microcode
- Fixed an OS installation issue w/4x C2050 Tesla cards installed
- Fixed an I/O conflict4 with the TPM
- Add AMI emergency BIOS recovery method
- Fixed an issue where all the memory would not count properly during POST when 4x PCIe VGA/GPU cards were installed |
|
|
|
|
2010/12/22 |
S7025_v107d_beta
|
v1.07d_beta |
Problem Fix Description:
- Fixed an I/O conflict with the TPM
- Fixes an issue where the OS install will lag when using 4x PCIE VGA/GPU cards are installed
- Updates CPU micro code
- Fixes an issue where all the memory will not count correctly when 4 PCIE VGA/GPU cards are installed |
|
|
|
|
2010/09/16 |
S7025_v107
|
S7025_v107 |
Problem Fix Description:
- Updated Intel ICH10R Option ROM to v9.6.0.1014
- Fixed a WHQL PCI hardware support issue
- Fixed a memory error beep code issue
- Fixed an issue where 2x GTX295 cards would get a Code 12 error in WinXP Device Manager
- Added NUMA support to ACPI Bios menu
- Updated CPU Micro code
- Fixed a Linux PCI Bug issue
- Fixed a 1.35v DIMM voltage issue
|
|
|
|
|
2010/03/19 |
S7025_v105
|
v1.05 |
|
Problem Fix Description:
- Fixed a compatibility issue with a 3ware 9690SA card
- Added Intel Westmere CPU support
- Updated Intel MRC code to v2.70
- Increased USB boot device number in BIOS setup
- Add support for DDR3 low voltage memory
- Fixed an issue where the system would hang during POST (FF) if the rest button was pushed too quickly during POST process
*Note: If you are using Intel Westmere CPU’s, you must use bios v105 or higher. Any previous bios will cause system to NO POST when Westmere CPU’s are installed
|
|
|
|
|
2009/12/16 |
S7025_v104
|
v1.04 |
Problem Fix Description:
- Fixed a performance issue when 4 PCIe cards were installed at once
- Fixed an issue where Turbo Mode would not function if TPM was enabled
- Fixed an issue where Speedstep would not function if TPM was enabled
- Fixed an issue where you could not boot from a CD-ROM when LSI 1068e was enabled
- Fixed an issue where you could not boot from a CD-ROM when the Intel AHCI was enabled
- Updated SATA naming scheme
- Fixed an issue where there were MCE errors in the Event Viewer log
- Updated CPU Support
- Fixed an issue where the system would hang at POST (78) when a SATA CD-ROM is
installed and AHCI is set to [Enable]
- Fixed an issue where the system could not boot to a SATA DVD-ROM device when AHCI
is set to [Enable]
- Fixed an issue where the system would not POST (2A) when 4x GTX 295 VGA cards were installed
- Added bios option to [Enable/Disable] Onboard VGA
- Added bios option (ACPI SRAT Table) to [Enable/Disable] NUMA support
- Fixed an issue where the PSU status does not show up correctly in the monitoring features |
|
|
|
|
2009/08/13 |
S7025_v103.zip
|
v1.03 |
Problem Fix Description:
- Updated AMI Bios core version
- Fixed an issue where LSI RAID cards would not function on IOH1
- Updated IPMI module
- Added Dual IOH S3 support |
|
|
|
|
2009/06/11 |
S7025_v102
|
v1.02 |
New features and Fixes :
* This is the first BIOS release |
|
|
|