|
Date |
Filename |
Version |
|
|
|
2006/12/01 |
gt20_b2865_304
|
v3.04 |
|
TYAN Transport GT20 (B2865) BIOS V3.04
New features and Fixes :
* Fixed an issue with clearing the CMOS so it will keep the RTC information
* Fixed system hang problem when using a "Canonpus video capture card"
* Fixed SMDC boot to BIOS problem
* Updated DMI information
* Added support for the M3290 TYAN SMDC
* Fixed post code "75h" problem when using GPT Partition in Solaris 10
* Fixed system will hang at post code "8B" when inserting Adaptec card AHA-2940AU.
* Changed the routing for the SMDC card to IRQ4
* Updated AMD PowerNOW! functionality
* Updated IOMMU support |
|
|
|
|
2006/03/02 |
gt20_b2865_302
|
v3.02 |
|
TYAN Transport GT20 (B2865) BIOS V3.02
New features and Fixes :
* Updated Opteron™ CPU support
* Fixed an issue where the auto fan control would interfere with the PWM capabilities
* Fixed an issue where sometimes you would get a system checksum error during boot
* Adjusted CPU temperature reporting for greater accuracy
* Updated Min PWM Temperature options from 35/40/45/50c to 30/35/40/45c (default= 40c)
* Fan speed will be run 100% PWM at 60c if auto fan control is enabled
* Fixed a "RAID Enabled" item where under special conditions it would report an error incorrectly
* Added WDT functions to the bios options
* Updated AMD CPU PowerNOW!™ support
* Fixed an issue when PWM1's fan gets bad, all fans will spin at MAX speed
* Added support for the M1000 LCD module |
|
|
|
|
2005/12/02 |
gt20_b2865_300
|
v3.00 |
|
TYAN Transport GT20 (B2865) BIOS V3.00
New features and Fixes :
* Updated AMD PowerNOW!™ Support
* Added RAID 5 support
* Added bios option for PCI Latency Timer
* Added Console Redirect Hot-Key (Esc + Esc) to enable BIOS BBS popup menu functions
* Adjusted CPU temperature readings
* Updated nVidia nForce RAID ID support for nVidia chipset drivers v6.66 and higher
* Added Marvell LAN Led support .
* Added console redirection baud rate 9600 and 19200
* Fixed a Watchdog timeout reset issue which will cause a CMOS checksum error at POST
* Fixed a Matrox 550 PCIe card issue where it couldn't be the first init video device
NOTE: If you are running a current OS installed with nVidia nForce driver v6.39 and BIOS v2.01 (or
earlier), you will need to re-install your OS using at least nVidia nForce driver v6.66 and bios v3.00. |
|
|
|
|
2005/10/10 |
gt20_b2865_201
|
v2.01 |
TYAN Transport GT20 (B2865) BIOS V2.01
New features and Fixes :
* This is the first release BIOS |
|
|
|