Intel Xeon Logo
Trophy NR18 (B5365N18P3) - Networking, telecom and data center
 | Manual | Quick Ref. |


Motherboard Features:

System Board

 • Tiger i7520SD (S5365G3NR)
 • Dual 479-pin sockets: Intel® Xeon® processors LV
   (Sossaman; dual core) 667MHz FSB
 • Intel® E7520 MCH + 6300ESB controller hub
 • Dual channel memory bus (must populate in pairs)
 • (8) 240-pin DDR2 sockets
 • Support up to 16GB registered ECC DDR2 400
 • (2) GbE LAN ports & (1) 10/100Mb Ethernet port
   - Intel® 82571EB GbE LAN controller
   - Intel® 82551QM fast ethernet LAN controller
Expansion Slot
 • (1) PCI-E x8 slot supports external output
   PCI-E card with 1-to-1 riser card (100MHz)
 • ATi ES-1000 graphics controller:
   Up to 16MB memory capacity
System Management
 • System Fan speed control, tachometer monitoring
 • Monitoring voltages for CPU, Memory and PS
   Monitoring temperature for CPU and environment
 • Phoenix BIOS with 8Mbit Flash ROM
   Support ACPI 2.0
   Power-on mode control for AC power loss recovery
   WOL and PXE supported (by Intel 82551QM only)
Regulatory (EMC & Safety)
 • FCC, CE Class B (Declaration of Conformity)

 • (2) Heatsink, air duct, Extended Mounting Plate
 • (1) PCI-E x8 riser card
 • Cables (power cord, 40-pin IDE, and SATA cable)
 • Manual, driver CD, diskette, Screw Pack

Chassis Features:

Image Illustration

 • Note: Item pictured is only representative.

NR18 (B5365)

 • Industry 1U rack-mount chassis
 • Dimension: D 15.47" x W 17.13" x H 1.73"
   (D 393mm x W 435mm x H 43.5mm)
 • Gross Weight: 11 Kg (24.25 lb)
Power Supply
 • EPS 12V, 1U, 250W Power Supply with PFC
 • 90V ~ 264V AC input
Front/Rear Panel I/O Ports
  • (1) Serial port with D-Sub 9-pin connector
 • (1) D-Sub 15-pin VGA port
 • (2) USB 2.0 ports with a dual-stacked USB
   connector + RJ-45
 • RJ-45 LAN port includes Transformer & (2) LED
 • Dual PS2 ports for keyboard and mouse
System Cooling
 • (2) Passive Al CPU heatsink
 • (3) 4028 (9200rpm) system fans + (1) CPU fan duct
 • (1) 50-pin Compact Flash Type II slot
 • (1) 40-pin IDE connector; supports 3.5" IDE HDD
 • (2) SATA1 connectors
Environment Temperature
  • Operating temperature 5°C ~ 35°C
 • Non-operating temperature -40°C ~ 70°C
 • Full-Loading: under 45dB
   (measured point: 100cm from IO)

Information published on is subject to change without notice.
Copyright © 2006, TYAN COMPUTER CORPORATION. All Rights Reserved.