Motherboard Features:
Motherboard TYAN Tempest i5000PX (S5380G2NR) Extended ATX footprint (12" x 13")
Processor
Dual LGA771 sockets Support up to two Intel® Xeon® 5000/5100 series
processors: dual-Core, 1066/1333MHz FSB
Chipset Intel® "Blackford" MCH Intel® 6321ESB I/O Controller Hub +
PXH-V Winbond 83627HF Super I/O chip
Memory (8) 240-pin DDR2 FBDIMM sockets Up to 16GB registered DDR2
533/667 memory
Expansion (2) PCI-E x16 slots (each with x8 signal) (1) PCI-E x8 slot (with x4
signal) (2) PCI-X 64/133MHz slots (5) total low-profile expansion cards supported
Integrated Storage Controller
(6) SATA 2.0 ports supported from Intel 6321ESB Supports up to 3Gb/sec.; support RAID 0, 1, 5, 10
Networking
Integrated dual GbE LANs from ESB2, with Intel "Gilgal" PHY network controller
Server Management
Auto. fan speed control; chassis intrusion alert Support Tyan Server Management (TSM) Option TYAN SMDC M3291, IPMI
v2.0 compliant remote server management kit (option)
BIOS Phoenix BIOS on 8Mbit LPC Flash ROM
Serial Console Redirect PXE via Ethernet, USB device boot PnP, DMI 2.0, WfM 2.0 Power Management
User-configuration of H/W monitoring Auto-configuration of hard disk types Multiple boot options
48-bit LBA Support |
|
Integrated Video
ATI® ES1000 controller; PCI interface 32MB
frame buffer of video memory
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chassis Features:
Enclosure Industry 2U rack-mountable chassis
Storage bay - (8) 3.5" HDD bays (1) slim line ODD bay Dimensions (inch): 17"(W) x 26"(D) x 3.5"(H)
Dimensions (mm): 432 (W) x 660 (D) x 88 (H)
Power Supply B5380T6V8H: EPS 12V, 2U, 600W with PFC B5380T26V8HR: EPS 12V,
2U, 600W 1+1 redundant power with PFC
Front Panel Features I/O: (2) USB 2.0 ports / Switch: Power,
Reset LED indicators: HDD active, Power, LAN (2)
Back I/O Ports (1) PS/2 Mouse and (1) keyboard ports
(6) USB 2.0 ports (1) 15-pin VGA port (1) 9-pin 16550 UART serial port (2) 10/100/1000
RJ-45 LAN ports
Cooling System fans: (2) 80x80x38mm + (1) 60x60x38mm (2) CPU active heatsinks
Storage Backplane (1) 8-port SAS backplane, support up to 8 SAS HDDs or SATA
HDDs (Note: Default supports 6 SATA HDDs with on board SATA controller only. It is
required to install 3rd party add-on card to support 8 SAS or SATA HDDs. Add-on card is not
shipped with the B5380T26V8H/R barebones)
Environment Temperature Operating temperature 5°C ~
35°C
Regulatory FCC Class B (Declaration of Conformity); CE |
|