Thunder HEsl-T (S2688) 
 | BIOS | CPU | Drivers | FAQ | Memory |

   Benefits and Applications

The Thunder HEsl-T is designed for mission-critical server applications requiring the power of dual processors, interleaved memory and high-bandwidth I/O performance.  It supports two CPUs, including the Pentium III Processor or the Pentium III Processor with 512kB Cache.  The Thunder HEsl-T also features an interleaved memory design, providing DDR-like bandwidth from an SDR design.This platform also features dual-channel LAN, SCSI, integrated VGA, and more.  These features make our Thunder HEsl-T ideal for today's server applications.
click here to see special note on 3 independent PCI Buses

  Product Skus
 

Standard Model

UPC Number

 S2688UGN

 6 35872 006173

  Specifications
 
  • Processor
    Dual PGA370 ZIF sockets (CPU support)
    Supports up to two Intel Pentium III Processors or Pentium III Processors with 512kB Cache
    Single onboard VRMs supports both processors
    FSB support for 100MHz and 133MHz
     
  • Chipset
    ServerWorks ServerSet III HE-SL chipset
    Integrated I/O APIC
    CIOB20 I/O bridge and CSB5 south bridge
    National NS87417 Super I/O ASIC
     
  • System Memory
    Six 3.3v 168-pin DIMM sockets
    Up to 6GB PC133 Registered     SDRAM
    Support ECC (72-bit) memory modules
     
  • Hardware Monitoring
     Winbond W83782D hardware monitoring ASIC
    CPU temp., voltage, and fan speed monitoring
     
  • Expansion Slots
     Three 64-bit 66MHz (5-volt) PCI slots. *
     One 64-bit 66MHz (3.3-volt) PCI slot. *
     3.3-volt slot supports Adaptec 2000S zero-channel RAID controller.
    Two 32-bit 33MHz (5-volt) PCI slots.
    Riser CardTotal of six usable slots
     
  • Integrated I/O
     One floppy connector supports up to two drives
    Two 9-pin 16550-based serial ports
    One 25-pin SPP/ECP/EPP parallel port
    Four USB ports (two via optional cable)
    PS/2 keyboard and mouse ports
     
  • Integrated PCI IDE
    Dual-channel master mode
    Up to four Enhanced IDE devices
    Support for ATA-66/33 compliant IDE and ATAPI compliant devices     **
  • Integrated Graphics
    ATI RAGE XL graphics accelerator
    4MB frame buffer (SDRAM)
    Standard 15-pin analog VGA ports
     
  • Integrated LAN Controllers
     Dual LAN controllers (Intel 82559)
    10/100Mbps data transfer rate per controller
     
  • Integrated SCSI Controller
     Adaptec AIC-7899W controller
    Dual-channel Ultra160 SCSI support
    160MBps maximum data throughput per channel; up to 15 LVD SCSI devices per ch.
     
  • Integrated Server Management (optional)
     Tyan Server Management Connector
    Supports the Intelligent Platform Management Interfaces (IPMI)
    Support for IPMI, SDR, SEC, FRU
    One IPMB and two I2C serial interfaces
     
  • BIOS
    AMI BIOS on 4Mb Flash ROM
    Supports APM v1.2 and ACPI v1.0
    User settings for hardware monitoring
    Auto-configuration of IDE hard drive types
    Multiple boot options; DMI 2.0 compliant
     
  • Form Factor
    Extended ATX footprint
     (13" x 12", 330.2mm x 304.8mm)
    One 20-pin ATX power connector
    Stacked parallel (one), serial (one) and VGA (one) ports; Stacked USB (two) ports
    Side-by-side LAN (two with LED) ports
    Stacked keyboard and mouse ports
     
  • Regulatory
    FCC DoC (Declaration of Conformity)
    European CE (Declaration of Conformity)

 * 66MHz is supported when 66MHz PCI device is used and CPU has 133MHz FSB.
** Due to limitations of the ServerWorks chipset, IDE transfer rates are limited to DMA at 16.6MB/sec.

Information published on Tyan.com is subject to change without notice.
Copyright © 2006, Tyan Computer Corporation. All Rights Reserved.