Intel Xeon
Thunder i7500 Pro (S2721) Datasheet Manual Jumpers Riser Card
 
| BIOS | CPU | Drivers | FAQ | Memory | Utility | Chassis / PS / Heat Sinks |
 
  Specifications

Processor
 • Dual mPGA603 ZIF sockets
 • Supports up to two
Intel® Xeon processors
    with 512KB of integrated L2 cache
 • Onboard VRM (VRM 9.1 spec)
 • Front-Side Bus support for 400MHz

Chipset
 •
Intel® E7500 server chipset
 • MCH +ICH3 +P64H2 +P64H2(optional) +FWH
 • Each Intel P64H2 supports two PCI-(X) buses
 •
Winbond™ W83627HF Super I/O chip
 • Winbond™ W83782D hardware monitoring IC

Memory
 • Six 184-pin 2.5V DDR DIMM sockets
 • Supports up to 12GB of Registered DDR266/200
 • Dual channel memory bus
 • Supports reg., ECC type memory only

Expansion Slots (four usable slots)
 • Five independent PCI(-X) buses
 • Two 64-bit 133/100/66MHz (3.3V) PCI-X slots
 • One 64-bit 100/66MHz (3.3-Volt) PCI-X slot
 • One 32-bit 33MHz (5V) PCI slot

Integrated I/O
 • One floppy connector supports up to two drives
 • Two 9-pin serial ports
    (one connector and one header)
 • One 25-pin ECP/EPP/SPP parallel header
 • Four USB 1.1 ports (two rear, two via header)
 • PS/2 keyboard and mouse connectors

Integrated LAN Controllers
 • Intel® 82546EB dual-channel Gigabit Ethernet
    controller with LEDs
    - Two RJ-45 LAN connectors
    - Connected to independent 133MHz PCI-X bus
 • Intel® 82551QM Fast Ethernet controller
    - One RJ-45 LAN connector with LEDs
    - Three RJ-45 LAN connectors with LEDs

Integrated Dual Channel SCSI (option)
• Adaptec AIC-7902W controller
 • Dual-channel Ultra320 SCSI
• Connects to PCI-X bus for
    maximum throughput
 • Adaptec Zero Channel RAID
    and Intel RAIDIOS ready

System MonitorSystem Management
 • Total of eleven 3-pin fan headers
 • Six fan headers with tachometer monitoring
 • One 2-pin chassis intrusion header
 • Temperature, voltage, and fan monitoring
 • Watchdog timer; SM Software:
here

Server Management (option)
  •
QLogic™ Zircon Baseboard Management
    Controller (BMC) based on powerful ARM7
 • Tailored for IPMI highest 1.5 Spec.
 • Supports flexible Windows and Linux based
    Management Solution; supports KCS & BT
 • Supports RMCP and SNMP protocols
 • Supports ASF standard and EMP
 • I2 C serial multi-master controllers and UARTs
 • Built-in IPMB connector
 • Supports remote Power on/off and reset support
    (IPMI over LAN); SMDC via built-in 2x25 header

Integrated PCI IDE
 • Provides two PCI bus master channels for
    up to four Enhanced IDE (EIDE) devices
 • Support for UDMA 33/66/100 IDE drives
     and ATAPI-compliant devices

Integrated Video
 •
ATI® RAGE™ XL PCI graphics controller
 • 8MB Frame Buffer of video memory

BIOS
 • AMI BIOS 8.0 on 4Mbit Flash ROM
 • LAN remote boot (PXE) and SMBIOS v2.3
 • BIOS Boot Specification v3.1 (BBS) support
 • Auto configuration of IDE hard drive types

Form Factor
 •
SSI EEB v3.0 footprint (12" x 13")
    - fits in many ATX-compliant tower chassis
  •
EPS12V power connectors; VGA (one) connectors
 • Stacked parallel (one) and serial (one) connectors
 • Stacked USB (two) and RJ-45 LAN (one) connectors
 • Side-by-side RJ-45 LAN (two) connectors
 • Stacked PS/2, keyboard, and mouse connectors

Regulatory
 • FCC DoC (Declaration of Conformity)
 • European Community CE  

Information published on Tyan.com is subject to change without notice.
Copyright © 2006, Tyan Computer Corporation. All Rights Reserved.