Processor
 • Dual mPGA604 ZIF sockets; onboard EVRD 10.1
 • Supports up to two Intel® Xeon® processors
     "Nocona" processors supported
 • Intel® EM64T support
 • Front-Side Bus support for 800MHz

Chipset
 • Intel® E7520 ("Lindenhurst") chipset
 • MCH North Bridge and ICH5R South Bridge chips
 • Two PXH I/O Bridge chips
 • Winbond W83627HF Super I/O chip

Memory
 • Eight DDR-333/266 DIMM sockets
 • Supports up to 16GB of Registered ECC memory

Expansion Slots
 • Three PCI-X 133/100/66 MHz slots
 • One PCI-X 100/66 MHz slot
 • One PCI-X 66 MHz slot
 • One (x8) PCI-Express slot
 • One 32-bit/33 MHz PCI 2.2 slot
 • Five PCI-X, one PCI-Express (x8), and one PCI
     independent buses; total of seven usable slots
 • One proprietary 200-pin TARO™ SO-DIMM
     connector (on PCI-X bus)

Integrated I/O
 • One floppy connector for up to two drives
 • Six USB 2.0 ports (two rear, four front via cable)
 • Two 9-pin UART serial support (1 via cable, opt.)
 • One 25-pin ECP/EPP parallel header
 • PS/2 mouse and keyboard stacked connectors

Integrated LAN Controllers
 • Dual 10/100/1000 GbE LAN
 • Intel 82546GB controller
 • Supports ASF 1.0 or IPMI 1.5
 • Two RJ45 connectors with LEDs

Integrated PCI IDE
 • Provides two PCI bus master channels for
     up to four UDMA IDE devices
 • Supports UDMA 100/66/33 IDE & ATAPI devices

Integrated Serial ATA
 • Provides independent DMA operation on 2 ports
 • Data transfer rates up to 1.5 GB/sec.
 • Supports RAID 0 or 1 (with 82801 ER/ICH5R chip)
 • Adaptec's driver and option ROM

Integrated Video
 • ATI® RAGE™ XL PCI graphics controller
 • 8MB Frame Buffer of video memory

System Management
 • ADI ADT7463 H/W Monitor IC
 • Six 3-pin system fan headers
 • Three 4-pin (3-pin compatible) fan connectors
 • Tachometer monitoring and PWM control
 • One 2-pin chassis intrusion header
 • SMBus connectors
 • Temperature and voltage monitoring
 • Watchdog timer; optional TYAN M3289 (Zircon)
     or M3290 (Zircon-UL) SMDC (Server
     Management Daughter Card) IPMI 1.5 via
     a 2x25 header

Optional Modules (SMDC/TSO Support)
 • SCSI module (optional) - M7902/M7901
    - Adaptec AIC-7902/7901 dual/single-channel
     -Ultra320 SCSI controller
    - operates at 64-bit PCI-X bus
    - Supports Intel®'s RAIDIOS™ and Adaptec's
       Zero-Channel RAID logic
    - Supports Adaptec's HostRAID™
    - Two 68-pin SCSI connectors

 • SATA RAID module (optional) - M8110
    - Adaptec/Marvell 64-bit PCI-X SATA-I controller
    - Eight or four 1.5 GB/sec. SATA ports
    - High-performance command queuing with
     EDMA support
    - Supports SATA RAID 0, 1, 10

BIOS
 • Phoenix BIOS 8 Mb flash ROM
 • Supports ACPI Power Management: S1, S4 & S5
 • Auto detection of memory size
 • Auto configuration of IDE hard disk types
 • User settings of hardware monitoring
 • Multiple boot options including PXE
 • Supports console re-direction

Form Factor
 • Extended ATX (12" x 13"; 305mm x 330mm)
 • One EPS ATX/12V 24-pin system power connector
 • One SSI EEB v3.51 compliant 8-pin split CPU
     power connector
 • Serial (1), parallel (1) and VGA (1) connectors
 • Stacked USB (2) ports; RJ-45 connectors
 • Stacked PS/2 keyboard and mouse connectors

Regulatory
 • FCC Class B (Declaration of Conformity)
 • European Community CE