Processor
Dual mPGA604 ZIF sockets; onboard EVRD 10.1 Supports up
to two Intel® Xeon® processors Nocona/Irwindale/Paxville processors supported Supports
Intel Extended Memory 64 Technology 800MHz Front-Side Bus support
Chipset Intel®
E7520 ("Lindenhurst") chipset MCH North Bridge and ICH5R South Bridge chips Two PXH I/O Bridge chips
Winbond W83627HF Super I/O chip
Memory Eight DIMM sockets Up to 32/16GB of reg. DDR-333/266 DIMM
Supports ECC type memory modules
Expansion Slots
Three PCI-X 133/100/66 MHz slots One PCI-X 100/66 MHz slot
One PCI-X 66 MHz slot One PCI-E (x8) slot and one PCI-E (x4) slot One 32-bit/33 MHz PCI 2.2 slot
Integrated I/O One floppy connector for up to two drives Six USB 2.0 ports (2 rear, 4
front via opt. cable) Two 9-pin UART serial support (1 via cable, opt.) One 25-pin ECP/EPP parallel header
PS/2 mouse and keyboard stacked connectors
Integrated PCI IDE
Provides two PCI bus master channels for
up to four UDMA IDE devices Support UDMA 100/66/33 IDE & ATAPI devices
Integrated Serial ATA
Provides independent DMA operation on 2 ports Data transfer rates up to 1.5Gb/sec. Supports RAID 0 or
1 (with 82801ER/ICH5R chip)
System Management ADI ADT7463 H/W Monitor IC Six 3-pin system fan headers
Three 4-pin (3-pin compatible) fan connectors Tachometer monitoring and PWM control for certain fans
One 2-pin chassis intrusion header SMBus connectors Temperature and voltage monitoring
Watchdog timer; optional TYAN M3289 (Zircon) or M3290 (Zircon-UL) SMDC (Server Management
Daughter Card) IPMI 1.5 via a 2x25 header |
|
Integrated LAN Controllers Dual 10/100/1000 GbE LAN
controllers Intel 82546GB controller Supports ASF 1.0 or IPMI 1.5 Two RJ45 connectors with LEDs
Integrated Video ATI® RAGE XL PCI graphics controller 8MB Frame Buffer of
video memory
Optional Modules (SMDC/TSO Support)
M7902 SO-DIMM Ultra 320 SCSI card - Adaptec AIC-7902 dual-channel Ultra320
- SCSI controller - operates at 64-bit PCI-X bus - Supports Intel®'s
RAIDIOS and Adaptec's - Zero-Channel RAID logic - Supports Adaptec's HostRAID
- Two 68-pin SCSI connectors
SATA RAID module (optional) -
M8110/M8120
- Adaptec/Marvell 64-bit PCI-X SATA-I controller - Four 1.5 GB/sec. SATA ports
- High-performance command queuing with EDMA support - Supports
SATA RAID 0, 1, 10 - Adaptec ZCR support
SAS module (optional) - M9000
- Adaptec AIC-9410W 8 port SAS controller - Up to 3.0 GB/sec. SAS and SATA data transfer
- Host RAID offer RAID level 0, 1, 10
BIOS
Phoenix BIOS 8 Mb flash ROM Supports ACPI Power
Management: S1, S4 & S5 Auto detection of memory size Auto configuration of IDE hard disk types
User settings of hardware monitoring Multiple boot options including PXE Supports console re-direction
Form Factor
Extended ATX (12" x 13"; 305mm x 330mm) One EPS ATX/12V 24-pin system power connector One SSI EEB
v3.51 compliant 8-pin split CPU power connector Serial (1), parallel (1) and VGA (1) connectors
Stacked USB (2) ports; RJ-45 connectors (2) Stacked PS/2 keyboard and mouse connectors
Regulatory FCC Class
B (Declaration of Conformity) European Community CE |
|