Processor
 • Dual mPGA604 ZIF sockets; onboard EVRD 10.1
 • Supports Dual-Core Intel® Xeon® processors
     "Nocona" processors supported
 • Intel® EM64T support;
 • Front-Side Bus support for 800MHz

Chipset
 • Intel® E7320 ("Lindenhurst-VS") chipset
 • MCH North Bridge and ICH5R South Bridge chips
 • One PXH I/O Bridge chip
 • Winbond W83627HF Super I/O chip

Memory
 • Eight DDR-333/266 DIMM sockets
 • Supports up to 16GB of Registered ECC memory

Expansion Slots
 • One PCI-X 133/100/66 MHz slot
 • One PCI-X 100/66 MHz slot
 • Two PCI-X independent buses
 • One proprietary 200-pin TARO™ SO-DIMM
     connector (on PCI-X bus)

Integrated I/O
 • One floppy connector for up to two drives
 • Six USB 2.0 ports (two rear, four front via cable)
 • Two 9-pin UART serial support (1 via cable, opt.)
 • One 25-pin ECP/EPP parallel header
 • PS/2 mouse and keyboard stacked connectors

Integrated PCI IDE
 • Provides two PCI bus master channels for
     up to four UDMA IDE devices
 • Supports UDMA 100/66/33 IDE & ATAPI devices

Integrated Serial ATA
 • Provides independent DMA operation on 2 ports
 • Data transfer rates up to 1.5 GB/sec.
 • Supports RAID 0 or 1 (with 82801 ER/ICH5R chip)
 • Adaptec's driver and option ROM

System Management
 • ADI ADT7463 H/W Monitor IC
 • Six 3-pin system fan headers
 • Three 4-pin (3-pin compatible) fan connectors
 • Tachometer monitoring and PWM control
 • One 2-pin chassis intrusion header
 • Temperature and voltage monitoring
 • Watchdog timer; optional TYAN M3289 or
     M3290 SMDC (Server Management Daughter
     Card) IPMI 1.5 via 2x25 header

Integrated LAN Controller
 • Dual 10/100/1000 GbE LAN ports
 • Intel 82546GB controller
 • Supports ASF 1.0 or IPMI 1.5
 • Two RJ45 connectors with LEDs

Integrated Video
 • ATI® RAGE™ XL PCI graphics controller
 • 8MB Frame Buffer of video memory

Optional Modules (SMDC/TSO Support)
 • Riser support
    - Tyan M2044 (2U Riser w/ 3 PCI-X slots)
    - Tyan M2360 (2U Riser w/ 3 PCI-X slots
     in 3 independent PCI-X 133 MHz buses)
    - Tyan M2364 (2U Riser with one PCI-Exp
     x4 slot and two PCI-X slots)
    - Tyan M2033 1U riser

 • M8110 /M8120 - SATA RAID module (optional)
    - Adaptec/Marvell 64-bit PCI-X SATA-I controller
    - Eight or four 1.5 GB/s SATA ports
    - High-performance command queuing w/ EDMA
     support
    - Supports SATA RAID 0, 1, 10
    - Adaptec ZCR support

 • M7902 - SCSI module (optional)
    - Adaptec AIC-7902 dual-channel Ultra320
    - SCSI controller - operates at 64-bit PCI-X bus
    - Supports Intel®'s RAIDIOS™ and Adaptec's
    - Zero-Channel RAID logics
    - Supports Adaptec's HostRAID™
    - Two 68-pin SCSI connectors

BIOS
 • Phoenix BIOS 8 Mb flash ROM
 • Supports ACPI Power Management: S1, S4 & S5
 • Auto detection of memory size
 • Auto configuration of IDE hard disk types
 • User settings of hardware monitoring
 • Multiple boot options including PXE
 • Supports console re-direction

Form Factor
 • Extended ATX (12" x 13"; 305mm x 330mm)
 • One EPS ATX/12V 24-pin system power connector
 • One SSI EEB v3.51 compliant 8-pin split CPU
     power connector
 • Serial (1), parallel (1) and VGA (1) connectors
 • Stacked USB (2) ports
 • RJ-45 connectors
 • Stacked PS/2 keyboard and mouse connectors

Regulatory
 • FCC Class B (Declaration of Conformity)
 • European Community CE