Intel XeonTyan RoHS 6/6
Thunder i7522 (S5362) Datasheet Manual Jumpers
 
| BIOS | CPU | Drivers | Memory | Cooling |

  Specifications

Processor
 • Supports
Intel® Xeon® "Nocona", "Irwindale", and
     "Paxville-2S" / dual-core processors
 • Two ZIFmPGA604 sockets
 • Onboard EVRD 10.1
 • 800MHz FSB support

Chipset
 • Intel® E7520 ("Lindenhurst") chipset
 • MCH North Bridge and ICH5R South Bridge chips
 • Two PXH I/O Bridge chips
 • Winbond W83627HF Super I/O chip

Memory
 • Eight DDR2-400 DIMM sockets
 • Up to 16GB of registered DDR2-400 memory
 • Supports ECC type memory modules

Expansion Slots
 • Three PCI-X 133/100/66 MHz slots
 • One PCI-X 100/66 MHz slot
 • One PCI-E (x8) slot with PCI-E (x4) lanes
 • One 32-bit/33 MHz PCI 2.2 slot
 • Four PCI-X, one PCI-E, and one PCI
     independent buses
 • One Tyan TARO Expansion 200-pin SO-DIMM
     socket

Integrated I/O
 • One floppy connector for up to two drives
 • Eight USB 2.0 ports (4 rear, 2 vertical front
     (USB Type A), 2 front via opt. cable)
 • Two 9-pin UART serial support (1 via cable, opt.)
 • One 25-pin ECP/EPP parallel header
 • PS/2 mouse and keyboard stacked connectors

Integrated PCI IDE
 • Provides two PCI bus master channels for
     up to four UDMA IDE devices
 • Support UDMA 100/66/33 IDE & ATAPI devices

Integrated Serial ATA
 • Provides independent DMA operation on 2 ports
 • Data transfer rates up to 1.5Gb/sec.
 • Supports RAID 0 or 1 (with 82801ER/ICH5R chip)

System Management
 • Analog Device ADT7463 H/W Monitor IC
 • Two 4-pin (CPU) and four 3-pin fan headers
 • Tachometer monitoring and PWM control for
     CPU and some system fans
 • One 2-pin chassis intrusion header
 • Temperature and voltage monitoring
 • Watchdog timer; optional TYAN M3291 SMDC
     (Server Management Daughter Card) IPMI 2.0
     via a 2x25 header

Integrated LAN Controllers
 • Two 10/100/1000 Gigabit Ethernet LANs
 • Two Broadcom® BCM5721 GbE controllers
 • Each operates at PCI-Express x1 lane
 • Two RJ45 connectors with LEDs

Integrated Video
 • ATI® ES1000 (a.k.a. RN50) PCI 2.2 VGA controller
 • 32MB DDR Frame Buffer of video memory

Optional Modules (SMDC/TSO Support)
 • Tyan proprietary 200-pin SO-DIMM Socket
 • Operates at 64-bit PCI-X bus
 • Support one of the following modules:
    -
M7902 TARO™ card with Adaptec AIC7902
     dual-channel Ultra 320 SCSI controller
    -
M7901 TARO™ card with Adaptec AIC7901
     single-channel Ultra 320 SCSI controller
    - M3124 TARO™ card with Silicon Image
     Sil3124-2 4-port SATA-II controller
    -
M8110 4-port SATA controller
 • Supports Intel's RADIOS and Adaptec's
     Zero-Channel RAID logics with
     M7902, M7901, M8110 or M8120

BIOS
 • Phoenix BIOS 8 Mb flash ROM
 • Supports ACPI Power Management:
     S1, S3, S4 and S5
 • Auto detection of memory size
 • Auto configuration of IDE hard disk types
 • User settings of hardware monitoring
 • Multiple boot options including PXE
 • BIOS Event Log for POST
 • Auto refresh H/W monitor display

Form Factor
 • Extended ATX (12" x 13"; 305mm x 330mm)
 • EPS ATX/12V power connectors (One 24-pin
     and two 8-pin with CPU split power)
 • Serial (1), parallel (1) and VGA (1) connectors
 • Stacked USB (2) ports
 • RJ-45 connectors (2, optional)
 • Stacked PS/2 keyboard and mouse connectors

Regulatory
 • FCC Class B (Declaration of Conformity)
 • European Community CE
 • RoHS-compliant version available 

 
Information published on TYAN.com is subject to change without notice.
Copyright © 2006, TYAN COMPUTER CORPORATION. All Rights Reserved.