Processor
Dual PGA603 ZIF sockets Supports up to two Intel® Xeon processors Two onboard VRMs Front-Side Bus support for 400MHz
Chipset
Intel® 860 chipset 82860 North Bridge, 82801BA I/O Controller Hub, 82802AB Firmware Hub
and 82806AA PCI 64 Hub
Memory Eight 184-pin RIMM sockets Dual channel memory bus
Supports up to 4GB of PC800 Rambus memory Memory Expansion Card (MEC) design
Expansion Slots
One AGP Pro slot; also supports 4x
Two 64-bit 66MHz (3.3-volt) and three 32-bit 33MHz (5-volt) PCI slots Total of six usable slots
Integrated I/O
One floppy connector supports up to two drives Two 9-pin 16550-based serial ports
One 25-pin ECP/EPP/SPP parallel header Two USB ports PS/2 keyboard and mouse ports
Integrated PCI IDE
Dual-channel master mode Support up to four Enhanced IDE devices Support for ATA-100/66/33 IDE and
ATAPI-compliant devices
Integrated LAN Controllers
Intel® 82550EY LAN controller
10/100Mbps data transfer rate |
|
System Management
3-pin fan monitoring headers 2-pin chassis intrusion
header CPU temperature and voltage monitoring Winbond W83782D hardware monitoring ASIC
Integrated Audio Analog Devices AD1885 chipset
AC'97 codec Line-in, Line-out and Mic ports
BIOS
Phoenix BIOS on 4Mb Flash ROM Supports
APM v1.2 and ACPI v1.0 User settings for hardware monitoring Auto configuration of IDE hard drive types
Multiple boot options; DMI 2.0 compliant
Integrated SCSI
LSI SYM53C1010R controller Dual-channel Ultra160
SCSI support 160MB/sec max. data throughput per channel Supports up to 15 LVD SCSI devices per channel
- Channel A: 68-pin connector - Channel B: 68-pin connector
Form Factor Extended
ATX footprint (13" x 12", 330.2mm x 304.8mm) One 24-pin and one 8-pin power connectors
Go here to see how to connect them.
Stacked parallel (one) and serial (two) ports Stacked RJ45 LAN and audio ports Stacked USB (two) ports
Stacked keyboard and mouse ports
Regulatory FCC DoC (Declaration of Conformity) European Community
CE |
|