Thunder K7X Pro (S2469) Datasheet Manual Jumpers Riser Card
| BIOS | CPU | Drivers | FAQ | Memory | Power Connector | S/I | Utility | Video | Chassis / PS |

  Specifications [ AMD Recommended ]

 • Dual mPGA462 ZIF sockets
 • Supports up to two AMD Athlon MP processors
 • Two onboard 3-phase VRMs
 • Front-Side Bus support for 266/200MHz

 • AMD-760 MPX chipset;
 • AMD-762 north bridge & AMD-768 south bridge
Winbond™ W83627HF Super I/O ASIC
 • Winbond W83782D hardware monitoring IC

 • Four 184-pin 2.5-Volt DDR DIMM sockets
 • 25° DDR sockets enable rackmount installation
 • Supports up to 4GB
* of Registered DDR 200/266
 • Supports ECC (72-bit) memory modules

Expansion Slots
 • One AGP Pro110 slot; also supports 4x/2x AGP
 • Two 64-bit 66MHz (3.3-Volt) PCI slots
 • Three 32-bit 33MHz (5-Volt) PCI slots
 • Total of six usable slots

Integrated I/O
 • One floppy connector supports up to two drives
 • Two 9-pin serial connectors
 • One 25-pin ECP/EPP/SPP parallel header
 • Four USB 1.1 ports (two via optional cable)
 • PS/2 keyboard and mouse connectors

Integrated PCI IDE
 • Provides two PCI bus master channels for
    up to four Enhanced IDE (EIDE) devices
 • Supports for UDMA-100/66/33 IDE drives
    and ATAPI-compliant devices

Integrated SCSI (opt)
 • Adaptec AIC-7902W dual-channel
    controller; Ultra320 SCSI support
 • Support up to 15 LVD SCSI devices per channel
 • Channel A and Channel B - 68-pin connectors
 • Adaptec and Intel Zero-Channel RAID ready

Integrated Video
 • ATI® RAGE™ XL PCI graphics controller
 • 8MB frame buffer of video memory

Integrated LAN Controllers
 • Fast Ethernet and Gigabit Ethernet controllers
    - Intel® 82545EM 10/100/1000Mbps controller
    - Intel® 82551QM 10/100Mbps controller
 • Two RJ-45 LAN connectors with LEDs
 • Two Front Panel LED headers

System Management (MDC/TSO Support)
 • 3-pin fan monitoring headers
 • Winbond W83782D hardware monitoring ASIC
 • CPU temperature and voltage monitoring

Server Management (Daughtercard opt)
QLogic™ Zircon Baseboard Management
 • BMC based on powerful ARM7 technology
 • Tailored for IPMI highest 1.5 Spec.
 • Supports KCS and BT styles
 • Supports Windows/Linux Management solution
 • Supports RMCP and SNMP protocols
 • Supports ASF standard and EMP
 • I 2C serial multi-master controllers and UARTs
 • Built-in IPMB connector
 • Supports remote Power on/off and reset
    (IPMI over LAN)

 • Phoenix BIOS on 4Mbit Flash ROM
 • PXE boot and SMBIOS v2.3 support
 • BIOS Boot specification v1.01 (BBS) support
 • Boot to USB (Mass Storage Class) support
 • Power on after AC failure control; ACPI support

Form Factor
 • Extended ATX Footprint
    - (13" x 12", 330.2mm x 304.8mm)
 • ATX12V/EPS12V
** universal power connectors
 • Stacked parallel (1), serial (1) and VGA (1) ports
 • Stacked USB (2) ports
 • Side-by-side RJ-45 LAN (2) ports with LEDs
 • Stacked keyboard and mouse ports

 • FCC DoC (Declaration of Conformity) certified
 • European CE (Declaration of Conformity)

* Note: The AMD-760 MPX requires memory to be reserved for PCI devices. Allocation is dependent on the number of PCI devices installed, and option ROM for each device. Common configurations will see 3.5GB to 3.8GB of available memory.
** Note: For heavy loading such as AGP Pro or multiple drive RAID systems EPS12V is recommended

Information published on is subject to change without notice.
Copyright © 2006, TYAN COMPUTER CORPORATION. All Rights Reserved.