Processor
 • Dual µPGA 940-pin ZIF sockets
 • Up to two AMD Opteron™ 200 series processors
 • Integrated 128-bit Dual-Ch DDR memory controller
 • Supports Single and Dual Core processors

Chipset
 • AMD-8131™  PCI-X Tunnel
 • NVIDIA nForce™ Prof. 2200 (CrushK8-04 Pro)
 • Winbond™ W83627HF Super I/O ASIC
 • Analog Devices ADT7463 Hardware Monitoring IC

Memory
 • 128-bit dual channel (interleaved) memory bus
 • Total of eight DDR DIMM sockets (four per CPU)
 • Supports up to 32GB of Registered DDR
 • Supports Single/Dual/Quad Rank mem. modules
 • Supports DDR 266/333/400 memory
 • Supports ECC with CHIPKILL technology
 
Expansion Slots
 • One x16 PCI Express slot with x16 signal
 • One x16 PCI Express slot with x4 signal
 • One PCI 2.3 compliant 5V tolerant 32bit/33MHz
 • Two independent 64-bit PCI-X buses
     - Two 133/100 MHz PCI-X slots from Bridge A
     - One 100/66 MHz PCI-X slot from Bridge B
     - One Tyan TARO™ SO-DIMM, 100/66MHz max.
       from Bridge B (supports M7901,M7902, M9000)

Integrated I/O
 • One floppy connector supports up to two drives
 • One parallel port header and two serial
     (one connector, one header)
 • Four USB 2.0 ports (two rear & two front)
 • One 15-pin VGA connector
 • PS/2 mouse and keyboard connectors
 
System Management
 • Total of nine 3-pin fan headers
 • Six fan headers with monitoring
 • One 2-pin Chassis Intrusion header
 • Temperature, voltage and fan monitoring

Integrated LAN Controller
 • One Broadcom BCM5704C dual-ch GbE
    - Two RJ-45 LAN connectors with LEDs
    - Connected to PCI-X Bridge B
    - Two Front Panel LED headers
 • One Intel® 82551QM 10/100Mbps LAN controller
    - One RJ-45 LAN connectors with LEDs, stacked
       on rear two USB 2.0 ports
    - Connected to 32bit/33MHz PCI 2.3 bus
    - One Front Panel LED header

Integrated Enhanced IDE Controller
 • Two IDE dual-drive ports support up to four
     EIDE devices; support for UDMA 133/100/66/33
     IDE drives and ATAPI devices

Integrated PCI Graphics
 • ATI® RAGE™ XL 8MB PCI graphics controller

Integrated SATA Controller
 • Two integrated dual port SATA-II controllers
 • Four SATA-II connectors: up to four drives
 • Supports 3.0Gb/s per port; RAID 0, 1, 0+1
 • NvRAID™ v2.0 support

Optional Modules (SMDC/TSO Support)
 • M7901/M7902, Ultra 320 SCSI TARO™ card
    - Adaptec AIC-7901/7902 single/dual-channel
     Ultra320 SCSI controller
    - Adaptec HostRAID 0, 1, 10 supported

 • M9000 SAS/SATA II TARO™ card
    - Adaptec AIC-9405/9410 SAS controller
    - Supports up to 4-port (M9000-5) and 8-port
     (M9000-10 ) SAS & SATA running at 3.0 Gb/s
    - Adaptec HostRAID 0, 1 & 10 supported

Intelligent Platform Management Interface Header
 • TYAN Server Management Daughter card
     (optional) supports features listed below via
     IPMI header
 • QLogic Zircon Baseboard Management Controller
     (BMC) based on powerful ARM7 technology
 • Tailored for IPMI highest 2.0 spec.
 • Supports KCS and BT styles
 • Flexible Windows or Linux Management Solution
 • Supports RMCP and SNMP protocols
 • Supports ASF standard and EMP
 • I2C serial multi-master controllers and UARTs
 • Build-in IPMB connector
 • Remote power on/off and reset support
    (IPMI-over-LAN)

BIOS
 • Phoenix BIOS on 8Mbit LPC Flash ROM
 • Supports ACPI 2.0 and SRAT
 • Supports PXE via Ethernet, USB device boot
 • SMBIOS 2.3.1, BBS 1.1 compliant
 • Headless Operation via serial console redirect
 • 48-bit LBA Support

Form Factor
 • SSI EEB v3.0 Footprint, fits most Rackmount
     E-ATX chassis (12"x13"; 304.8x330.2mm)
 • EPS 12V/SSI (24 + 8pin) power connectors
 • Serial (one) and VGA (one) connectors
 • Stacked USB 2.0 (two) connectors
 • Stacked PS/2 keyboard and mouse connectors
 • Two RJ-45 LAN connectors with LEDs

Regulatory
 • FCC Class B / European Community CE (DoC).