Processor
 • Dual µPGA 940-pin ZIF sockets
 • Two onboard 4-phase VRM
 • Supports up to two AMD Opteron™ 200 processors
 • Three HyperTransport™ links support up to
     8.0GB/s data transfer rate each link
 • 144-bit DDR interface (128-bit data + 16 bit ECC)
 • Scalable 32bit & 64bit computing
 • Secure computing with Nx register support
 • Supports Single and Dual Core processors

Chipset
 • AMD-8131™ HyperTransport™ PCI-X Tunnel
 • NVIDIA nForce™ Prof. 2200 (CrushK8-04 Pro)
 • Winbond™ W83627HF Super I/O ASIC
 • Analog Devices ADT7463 Hardware Monitoring IC

Memory
 • 128-bit dual channel (interleaved) memory bus
 • Total eight DDR DIMM sockets (four per CPU)
 • Supports up to 32GB of Registered DDR
 • Supports Single/Dual/Quad Rank mem. modules
 • Supports DDR 266/333/400 memory
 • Supports ECC with CHIPKILL Technology

Expansion Slots
 • One PCI Express x16 slot with 1U riser support:
     - Other riser solutions in development
 • One Tyan TARO SO-DIMM 100MHz (PCI-X B)
 • One PCI-X 100MHz slot (Bridge B)
 • Total of three usable slots

 * NOTE: Use of PCIe x16 riser is necessary for installation of PCIe x16 add-on cards! See this matrix for details: Tyan Riser Card Matrix

Integrated I/O
 • One floppy connector
 • One parallel port header and two serial
     (one connector, one header)
 • Six USB 2.0 ports
     (two rear connector & four front panel headers)
 • One 15-pin VGA connector
 • PS/2 mouse and keyboard connectors
 
System Management
 • Total of ten 3-pin fan headers with PWM support
 • Seven fan headers with tachometer
     (four from ADT7463 three from W83627HF)
 • One 2-pin Chassis Intrusion header
 • Temperature, voltage and fan monitoring
 • Port 80h LED 7-segment display

Integrated LAN Controller
 • One Broadcom BCM5704 dual port GbE LAN
    - Two RJ-45 LAN connectors with LEDs
    - Connected to PCI-X Bridge A (133MHz)
 • Two Front Panel LED headers

Integrated PCI Graphics
 • ATI® RAGE™ XL 8MB PCI graphics controller

Integrated Enhanced IDE Controller
 • Two IDE ports for up to four EIDE devices
 • Supports ATA-133 IDE drives & ATAPI devices

Integrated SATA Controller
 • Two integrated dual port SATA-II controllers
 • Four SATA-II ports support up to four drives
 • Supports 3.0Gb/s per port; RAID 0, 1, 0 + 1
 • NvRAID™ v2.0 support

Intelligent Platform Management Interface Header
 • TYAN Server Management Daughter card
    (optional) supports features listed below via
    IPMI header
 • Baseboard Management Controller (BMC)
 • Tailored for IPMI
 • Supports KCS and BT styles
 • Flexible Windows or Linux Management Solution
 • Supports RMCP and SNMP protocols
 • Supports ASF standard and EMP
 • I2C serial multi-master controllers and UARTs
 • Build-in IPMB connector
 • Remote power on/off and reset support
    (IPMI-over-LAN)

BIOS
 • Phoenix BIOS on 8Mbit LPC Flash ROM
 • Supports ACPI 2.0 and SRAT
 • Supports PXE via Ethernet, USB device boot
 • SMBIOS 2.3.1, BBS 1.1 compliant
 • Headless Operation via serial console redirect
 • 48-bit LBA Support

Form Factor
 • Extended ATX (12"x13"; 304.8x330.2mm)
 • SSI 3.0/3.51 (24pin + 8pin) power connectors
 • Serial (one) and VGA (one) connectors
 • Stacked USB 2.0 (two) connectors
 • Stacked PS/2 keyboard and mouse connectors
 • Two RJ-45 LAN connectors with LEDs

Regulatory
 • FCC Class B (DoC)
 • European Community CE (DoC)