Processor
 • Four 1207-pin sockets support AMD Opteron™
     (Rev. F) 8000 series processors
 • Uses the standard 3 1/2"/ 89mm socket connector
 • Four onboard 5-phase digital VRMs

Chipset
 • nVIDIA nForce Professional 2200 (CK804pro)
 • nVIDIA nForce Professional 2050 (IO4)
 • Winbond W83627HF Super I/O
 • Three Analog Devices ADT7476 Hardware
     Monitoring IC

Memory
 • Dual channel memory bus
 • (16) 240-pin DDR2 DIMM sockets (four per CPU)
 • Up to 64GB of DDR2 667/533/400 DIMMs
 • Supports reg., ECC, & four rank mem. modules

Expansion Slots
 • (2) PCI-E x16 slots (with x16 signal)
 • (2) PCI-E x16 slots (with x4 signal)
 • (1) PCI v2.3 32-bit 33MHz slot
 • (5) Usable expansion slots total

Integrated I/O Interfaces
 • (1) Floppy connector support up to two drives
 • (1) Parallel port header
 • (2) Serial ports (one connector, one header)
 • (6) USB v2.0 EHCI ports (two rear, four headers)
 • (1) Stacked PS/2 mouse and keyboard ports

Integrated PCI Graphics
 • XGI Volari Z7™ (XG20) PCI graphics controller
 • 16MB Frame Buffer of video memory

Integrated ATA-133
 • (2) ATA-133 Channels: up to 4 ATA-133 devices

Integrated Serial ATA Controller
 • (4) Dual port SATA controllers
     (two from CK804pro and two from IO4)
 • (8) SATA2 ports for up to eight drives at 3.0Gb/s
 • RAID 0, 1, 0+1, 5 supported

System Management
 • Modular BMC 2x25 pin header for SMDC support
 • (6) 4-pin FAN headers support tachometer
     monitoring & smart FAN control (PWM), four 3-pin
     fan headers support tachometer monitoring
 • Temperature & voltage monitoring
 • Port 80h LED display

Integrated LAN Controllers
 • (2) Marvell 88E1111 GbE PHY
    - Each one has RJ-45 LAN connector w/ LEDs
    - Each one has front panel LED header
 • (1) Intel 82541PI GbE LAN controller
    - RJ-45 LAN connector with LED

Intelligent Platform Management
Interface Header
 • TYAN Server Management Daughter card
    (optional) supports features listed below via
    IPMI header (SMDC/TSO Support)
 • Renesas Baseboard Management Controller
    (BMC); tailored for IPMI 2.0 Spec.
 • Supports KCS and BT styles
 • Flexible Windows & Linux Management Solution
 • Supports RMCP and SNMP protocols
 • Supports ASF standard and EMP
 • I2C serial multi-master controllers and UARTs
 • Built-in IPMB connector
 • Remote power on/off and reset support
    (IPMI-over-LAN)

BIOS
 • Phoenix BIOS on 8Mbit LPC Flash ROM
 • ACPI 2.0; Power management: S0, S1, S4, & S5
 • Serial Console Redirect
 • USB device boot
 • 48-bit LBA support

Form Factor
 • SSI MEB footprint (13" x 16")
 • EPS12V/SSI v3.5 (24 + 8 + 8) power connectors