Tiger 100 (S1832) 

  Benefits and Applications

Tyan Tiger 100 is a quality, high performance dual processing solution which supports the powerful Intel Pentium II / III microprocessors. This mainboard is designed around the Intel 440BX AGPset.   Please refer to the Motherboard CPU Compatibility Chart for more specs.

The Tiger 100 supports SPD SDRAM  memory and  ECC SDRAM.  The board's PCI Local Bus and new 32-bit AGP bus provides high performance capabilities that are ideal for a wide range of demanding applications such as: CAD, CAM, CAE, real-time 3D, and simulations.

This integrated system board achieves the highest reliability and is based on an ATX form factor. Some of the features included are: integrated dual channel PCI IDE, integrated floppy controller, integrated high speed I/O, Universal Serial Bus, on-board PS/2 mouse connector, and optional System Mangement.

Flexibility and expandibility have been considered when designing the Tiger 100. With I/O and drive controller support built om, the Tiger 100 allows many upgrade paths not found on other boards. With four 168-pin DIMM sockets, the Tiger 100 can provide a very flexible memory configuration of up to 1 GB  SPD SDRAM or SDRAM+ECC in addition to the new 100 MHz SDRAMs (PC100 memory required for 100 MHz operation)

  Tiger 100 Models

Standard Model

UPC Number


 6 35872 00416 2

  Standard Features

  • Processor
    Single or Dual Pentium II / III
    Up to 100 MHz BUS Support
    2 Slot 1 Connectors (SEC)
    2 On-board CPU Fan Headers
    2 On-board Case Fan Headers
    VRM components installed on board
    Processor speeds:
    CPU compatibility chart
  • Chipset
    Intel 440BX (100 MHz AGP set)
    Latest Generation Pentium II Chipset
    National "309" Super I/O Chipset
  • System Memory
    Up to 1GB Memory Support (3.3V only)
    Synchronous DRAM W/SPD
    Four 168-pin
    DIMM Sockets; SDRAM + ECC
    100 MHz SDRAM support [
    Compatibility ]
  • Disk Drive & System I/O
    Two UltraDMA/33 PCI Bus-Master EIDE Ports
    Supports EIDE CD-ROMs
    Bus-Mastering Mode 2 (Up to 22MB/sec DTR)
    PIO Mode 3 & 4 (Up to 17MB/sec DTR)
    Two Floppy Drive Support (Up to 2.88MB)
    Japanese Mode 3 Floppy Support
    Two ATX 16550 High Speed Serial Ports
    One ATX  ECP/EPP High Speed Parallel Port
    2 ATX USB Ports Rev 1.2
    One IR (InfraRed) Port
    PS/2 Keyboard (1) and Mouse (1) port
    Wake on LAN / Wake on Ring headers
      Requires ATX 2.01 Compliant PS
  • Expansion Slots
    Five 32-bit PCI Bus Mastering Slots
    Two 16-bit
    ISA Slots; one 32-bit AGP Slot
    One Shared PCI/ISA Slot
  • Voltage and Power
    ATX Power Supply Connector
    +12V Power Source for DC-FAN
    3.3V DRAM Support
    Utilizes GTL+ Bus, Reducing Power Consumption and EMI
    LM79/LM75 control chips with on-board alarm for heat, fan and voltage.  Reports to the operating system for system monitoring.  Intel LANDesk Client Manager software included.
    Chassis Intrusion Detection Capable
    Power recovery after interrupt feature
    Wake on LAN 3-pin header

      Requires ATX 2.01 Compliant PS
  • BIOS
    AMI Plug 'n' Play 2Mb flash BIOS Standard
    Deep Green / Energy Star / PC97 compliant
    Yellow LED for Sleep mode; Y2K compliant
  • Form Factor
    Extended ATX (9.8" x 12.0")
    Double Row ATX Connectors
    Type "V" I/O Shield (Intel Venus Compatible)
  • Regulatory
    FCC DoC (Declaration of Conformity)
    CE (Declaration of Conformity)

Information published on Tyan.com is subject to change without notice.
Copyright © 2006, Tyan Computer Corporation. All Rights Reserved.