Intel Xeon
Tiger i7501R (S2735) Datasheet Manual Jumpers
| BIOS | CPU | Drivers | Memory | Chassis / PS / Cooling |


 • Dual mPGA604 ZIF sockets
 • Supports up to two
Intel® Xeon® processors
    with 512K L2 cache 533MHz, 400MHz FSB
    and 1MB L3 cache 533MHz FSB
 • Onboard 4-phase VRM (VRM 9.1 spec)
 • Front-Side Bus support for 533/400MHz

Intel® E7501 server chipset
 • MCH + ICH5R + P64H2 + FWH
 • Intel® P64H2 supports two PCI(-X) buses
Winbond™ W83627HF Super I/O chip
 • Winbond™ W83782D hardware monitoring chip

 • Six 184-pin 2.5V DDR DIMM sockets
 • Supports up to 12GB of Registered DDR266/200
 • Dual channel memory bus
 • Supports Registered memory only
 • Supports ECC type memory modules

Expansion Slots (total of four usable slots)
 • Three independent PCI/PCI-X buses
 • Two 32-bit 33MHz (5V) PCI slots
 • Two 64-bit 133/100/66MHz (3.3V) PCI-X slots

Integrated I/O
 • One floppy connector supports up to two drives
 • Two 9-pin serial ports
    (one connector and one header)
 • One 25-pin ECP/EPP/SPP parallel header
 • Four USB 2.0 ports (two rear & two via header)
 • PS/2 keyboard and mouse connectors

Integrated PCI (Parallel ATA)
 • Provides two PCI bus master channels for
    up to four UDMA IDE devices
 • Support for UDMA 100/66/33 IDE/ATAPI devices

Integrated Serial ATA Host Controllers
 • Provides independent DMA operation on 2 ports
 • Data transfer rates up to 150MB/s
 • Supports RAID 0, 1 (with 82801ER/ICH5R chip)

* Note: Maximum number of IDE devices supported with any combination of Integrated IDE and SATA IDE is four devices.  For example: 2 SATA and 2 P-ATA (total = 4)

Integrated 2D/3D Graphics
 • ATI® Rage™ XL PCI graphics controller
 • 8MB Frame Buffer of video memory

M7902 (option) [ click to see detail spec ]

Integrated LAN Controllers
 • Intel® 82546EB dual-channel Gigabit Ethernet
    controller (Default configuration)
     - Two RJ-45 LAN connectors with LEDs
     - Connected to an independent PCI-X bus
 • Two LAN LED headers for external LED output
 • Intel® 82551QM Fast Ethernet controller
     - One RJ-45 LAN connector with LEDs
     - One LAN LED header for external LED output

System Management (MDC/TSO Support)
 • Total of nine 3-pin fan headers
 • Six fan headers with tachometer monitoring
 • One 2-pin chassis intrusion header
 • Temperature, voltage, and fan monitoring
 • Watchdog timer

Server Management (IPMI - option)
QLogic™ Zircon Baseboard Management
    Controller (BMC) based on powerful ARM7
 • Tailored for IPMI highest 1.5 Spec.
 • Supports KCS and BT styles
 • Supports flexible Windows and Linux based
    Management Solution
 • Supports RMCP and SNMP protocols
 • Supports ASF standard and EMP
 • I2C serial multi-master controllers and UARTs
 • Built-in IPMB connector
 • Supports remote Power on/off & reset support
    (IPMI over LAN); SMDC via built-in 2x25 header

 • AMI® BIOS 8.0 on 4 Mbit Flash ROM
 • LAN remote boot (PXE) & SMBIOS v2.3 support
 • BIOS Boot Specification v3.1 (BBS) support
 • Auto configuration of IDE hard drive types

Form Factor
 • ATX footprint (12" x 10.0"; 304.8mm x 254mm)
 • EPS12V power connector
 • Serial (one) and VGA (one) connectors
 • Stacked USB (two) connectors and
    RJ-45 LAN port on top
 • Stacked PS/2 keyboard and mouse connectors
 • Two RJ-45 Side-by-side connectors with LEDs

 • FCC Class B (Declaration of Conformity)
 • European Community CE  

Information published on is subject to change without notice.
Copyright © 2006, TYAN COMPUTER CORPORATION. All Rights Reserved.