Processor
Dual PGA462 ZIF sockets Supports up to two AMD Athlon MP
processors Two onboard VRMs Front-Side Bus support for 266/200MHz
Chipset AMD-760 MP
chipset AMD-762 north bridge & AMD-766 south bridge
Winbond W83627HF Super I/O ASIC
Memory Four 184-pin
2.5-Volt DDR DIMM sockets Supports up to 4GB *
of Registered DDR 200/266 Supports ECC (72-bit) memory modules
Expansion Slots One AGP slot supports 4x/2x AGP modes Four 64-bit 33MHz (5-volt) PCI
slots Two 32-bit 33MHz (5-volt) PCI slots Total of seven usable slots
Integrated I/O One
floppy connector supports up to two drives Two 9-pin 16550-based serial ports One 25-pin SPP/ECP/EPP parallel header
Four USB ports (two stacked rear connectors and two front panel headers) PS/2
keyboard and mouse ports
*
Note: The AMD-760 MPX requires a portion of memory to be reserved for PCI devices. Allocation for these devices is dependent on the number of PCI devices installed, and option ROM for each device. Common configurations will see 3.5GB to 3.8GB of available memory.
|
|
Integrated PCI IDE
Dual-channel master mode Supports up to four
enhanced IDE devices Support for DMA100/66/33 IDE and ATAPI compliant devices
System Management 3-pin fan monitoring headers
3-pin Wake On LAN header (optional) Winbond W83782D hardware monitoring ASIC System Monitoring Software: here
BIOS Phoenix BIOS 4Mbit Flash ROM
User settings for hardware monitoring (option) Auto-configuration of IDE hard drive types Multiple boot options
DMI 2.0 compliant
Form Factor ATX footprint (12" x 10.3", 304.8 x 261.62mm)
20-pin power connector (300+W, +5V must be 30A+) Stacked parallel (one) and serial (two) ports
Stacked USB (two) ports Stacked keyboard and mouse ports
Note: The Tiger MP S2460 accepts a standard ATX-style
power supply. However, the P/S must be able to supply a minimum of 30A on the 5-volt line.
Many 300+ watt power supplies on the market today are capable of this output.
Regulatory FCC DoC (Declaration of Conformity) certified
European CE (Declaration of Conformity)
|
|