Intel Celeron DIntel Pentium 4Tyan RoHS 5/6
Tomcat i7210 (S5112) Datasheet Manual Jumper
| BIOS | CPU | Drivers | Memory |


 • Supports one Intel® Pentium® 4 "Northwood" or
      "Prescott" 800/533MHz FSB processor, also
      supports Celeron™ processor up to 2.8GHz
 • Single mPGA478 ZIF socket
 • Onboard VRM 10

 • Intel® E7210 ("Canterwood ES") chipset
 • E7210 (North Bridge)
 • 6300ESB "Hance Rapids" (South Bridge)
Winbond™ W83627HF Super I/O chip

 • Four 184-pin 2.5V DDR DIMM sockets
 • Dual/Single channel memory bus
 • Supports ECC/non-ECC type memory modules
 • Supports up to 4GB of unbuffered DDR400/333

Expansion Slots
 • Two 64-bit PCI-X (3.3v) 66MHz slots
 • Three 32-bit 33MHz PCI 2.2 (5v) slots
 • Total of five usable slots

Integrated I/O
 • One floppy connector for up to two drives
 • Two 9-pin serial ports (one via optional cable)
 • One 25-pin ECP/EPP/SPP parallel header
     (via optional cable)
 • Four USB 2.0 ports (two front via optional cable)
 • PS/2 keyboard and mouse ports

Integrated PCI IDE (6300ESB Hance Rapids)
 • Up to two bus-master IDE channels
 • Supports up to 4 ATA-100/66/33 IDE
    ATAPI-compliant devices

Integrated SATA Ports
 • Two ICH5-S integrated SATA ports
    up to 1.5 Gbit/s
 • Supports SATA RAID 0,1
Integrated SATA RAID Controller
 • Silicon Image Sil3114 SATA controller
 • Four 1.5Gbit/S SATA ports
 • Supports SATA RAID 0, 1, 10

Integrated Video
 • ATI® RAGE™ XL PCI graphics controller
 • 8MB frame buffer (SDRAM)

Integrated LAN Controllers
 • Up to two GbE onboard LAN controllers
      - Intel 82547GI CSA GbE NIC
      - Intel 82541GI PCI GbE NIC

System Management (SMDC/TSO Support)
 • On board Analog Devices ADM1027
      Hardware Monitoring chip
 • Total of seven 3-pin fan headers with tachometer
      monitoring and five of them with PWM control
 • 3-pin chassis intrusion header
 • Temperature and voltage monitoring
 • IPMB connector; Watchdog timer
 • Supports Tyan
M3289 SMDC via 2x25 pin header

Tyan 1U/2U Riser Support
 • Supports Tyan M2033, M2037, M2037R and
     M2053 1U riser cards
 • Supports Tyan M2042, M2043, M2043X, and
     M2044 2U riser cards

 • Award BIOS 8Mb flash ROM
 • Supports ACPI 1.0, PnP, DMI 2.0
 • Auto configuration of IDE hard disk types
 • User settings of hardware monitoring
 • Multiple boot options
 • Power Management: ACPI S1, S3, S4 and S5

Form Factor
 • ATX 2.03 Footprint (12"x9.6", 305x244mm)
ATX12V v1.3 Power Connectors
 • Optimized for 1U/2U rackmount/pedestal chassis
 • Stacked PS/2 keyboard and mouse connectors
 • Stacked USB (two) connectors
 • Serial (one) and VGA (one) connectors
 • Side-by-side RJ-45 (two) connectors

 • FCC Class B (Declaration of Conformity)
 • European Community CE  

Information published on is subject to change without notice.
Copyright © 2006, TYAN COMPUTER CORPORATION. All Rights Reserved.