Intel CeleronIntel Pentium 4 with Hyper-Threading
Tomcat i875PF (S5105) Datasheet Manual Jumpers
| BIOS | CPU | Drivers | Memory |


 • Single PGA478 ZIF socket
 • Supports Intel® P4 "Northwood" and "Prescott"
    (533MHz FSB Prescott CPU support only)
 • Onboard VRM 10.0

Intel® 875P (Canterwood) MCH
 • Intel 82801EB (ICH5) South Bridge
 • MCH + ICH5 (or ICH5R)
 • Winbond™ W83627HF LPC I/O ASIC

 • Supports up to four DDR DIMM sockets
   (Dual Channel Configuration)
 • Up to 4GB of unbuffered DDR400/333 memory
 • Registered memory is NOT supported
 • Supports ECC/non-ECC type memory modules

Expansion Slots
 • Two 32-bit (5-volt) 33MHz PCI v2.2 slots

Integrated I/O Interfaces
 • One Floppy connector for up to two drives
 • Two 9-pin UART serial ports
    (one header via cable)
 • Four USB 2.0 ports (2 rear ports & 2 headers)
 • One parallel port (through header via cable)
 • PS/2 Mouse & keyboard poarts

Integrated PCI ATA & SATA
 • Intel ICH-5 or ICH-5R
 • Up to four Enhanced UDMA and SATA devices
 • Dual channel UDMA Master mode for up to
    4 devices
 - Supports for UDMA 33/66/100 IDE drives
        and ATAPI compliant devices
 • Support two independent SATA ports
 - Data transfer at 1.5 Gb/s
    - Supports RAID 0 or 1 (only with ICH-5R)

Integrated LAN Controllers
Intel® 82547EI CSA 10/100/1000 controller
 • Intel® 82540EI PCI 10/100/1000 controller
 • WOL/PXE/ASF2.0 support
 • Two RJ-45 LAN connectors w/ LEDs

Integrated PCI Graphic
 • ATI® RAGE™ XL PCI controller
    8MB frame buffer of video memory

System Management
 • Winbond W83627HF w/ hardware monitoring
 • One 3-pin CPU & two 3-pin chassis fan headers
     (temperature controlled)
 • 2-pin Chassis Intrusion headers
 • Two temperature sensors & voltage monitoring
 • Watchdog timer

Server Management (option)
QLogic™ Zircon Baseboard Management
    Controller (BMC) based on powerful ARM7
 • Tailored for IPMI highest 1.5 Spec.
 • Supports KCS and BT styles
 • Supports flexible Windows and Linux based
    Management Solution
 • Supports RMCP and SNMP protocols
 • Supports ASF standard and EMP
 • I2C serial multi-master controllers and UARTs
 • Built-in IPMB connector
 • Supports remote Power on/off and reset support
    (IPMI over LAN)
 • Server Management Daughter card via built-in
    2x25 header

 • Award BIOS on 4Mbit Flash ROM
 • ACP1.1 / APM1.2
 • User settings of HW monitoring
 • Auto configuration of IDE hard disk types
 • Quick boot and multiple boot options
 • LAN remote boot (PXE) support
 • Event Log support (4K EEPROM)
 • Power Management: S1, S3, S4, and S5

Form Factor
 • Flex ATX (9.0" x 8.0"; 229mm x 203mm)
 • ATX12V power connectors
 • Side by side PS2 Mouse/Keyboard connectors
 • Stacked 2 USB connectors and RJ45 LAN
    connector w/LEDs
 • One Serial connector
 • One VGA connector
 • One RJ45 LAN connectors w/ LEDs

 • FCC DoC (Declaration of Conformity)
 • European Community CE 

Information published on is subject to change without notice.
Copyright © 2006, TYAN COMPUTER CORPORATION. All Rights Reserved.