Trinity K7 (S2380) 

  Benefits and Applications

Tyan Trinity K7 is designed for high performance desktop applications.  With six PCI slots in addition to one shared ISA slot, the Trinity K7 offers maximum expandability and flexibility in an ATX form factor.  Utilizing the new VIA KX-133 chipset, this board offers a 200 MHz FSB, Slot A support  (AMD Classic Athlon), 4x AGP, UltraDMA33/66, and PC133 memory support.  This feature-rich systemboard is ideal for graphics and memory-intensive applications.

  Product Skus

Standard Model

Integrated Audio

UPC Number



 6 35872 00514 5


  • Processor
    Single Slot A; 200MHz FSB
    AMD Classic Athlon 500MHz to 1 GHz
    Auto-detect Processor Voltage
    Clock multiplier 5.0 to 10.0
    ECC Protection on system and Cache Interfaces
    Processor speeds:
    CPU compatibility chart
  • System Memory
    Three 168-pin 3.3V DIMM Sockets
    Supports up to 768 MB
    Supports PC100 / PC133
    SDRAM and VCM SDRAM (see  Compatiblity List  )
    ECC memory not supported
  • Cache Memory
    Processor Built-in 128KB L1 Cache
    Processor Built-in 512KB L2 Cache
  • Hardware Monitoring
    VIA hardware monitoring chip
    3-pin Fan monitoring headers
    Flexible Temperature Sensor Under CPU heatsink
    Hardware Detects +/- 5V, +/- 12V, CPU status
    System Health Status Detect
    3-pin Wake on LAN header
    3-pin Wake on Ring header
  • Expansion Slots
    One 1x / 2x / 4x AGP v.2.0 slot
    Six 32-bit
    PCI v.2.2 compliant slots
    One 16-bit
    ISA slot (shared w/ a PCI slot)
    Total seven usable slots
  • Integrated I/O
    One Floppy connector for up to two drives
    Two 9-pin 16550 UART Serial ports
    One 25-pin ECP / EPP Parallel port
    PS/2 Mouse & Keyboard ports
    Four USB ports (two headers via cable optional)
  • Integrated Audio (optional)
    VIA VT82C686A Southbridge Digital
    Link Audio
    AC'97 Audio Codec
    Line-in, Line-out, Mic ports
    4-pin CD-ROM audio header
  • Integrated PCI IDE
    Dual channel master mode
    Supports four Enhanced
    IDE devices
    Support for PIO Mode 3/4, Ultra DMA
    33 / 66 and
    ATAPI compliant devices
  • Power Supply
    One 20-pin ATX power connector
    Input voltage -   90V to 130V at 60 Hz
    Output Wattage -  235W
    Output Voltage -  3.3V, +/- 5V, +/- 12V
    Backup Battery
      - 3.0V to 3.6V Cr2032 lithium
      - magnesium-oxide coin cell
  • BIOS
    Award BIOS 2Mbit Flash RAM
    Supports APM &
    Auto detection of memory size
    Auto configuration of IDE hard disk types
    User settings of hardware monitoring
    Multiple boot options
    DMI 2.-0 / PC99 compliant
  • Form Factor
    ATX 2.01  (12.0" x 8.2")
    4-layer board
    Stacked Mouse / Keyboard ports
    Stacked (2) USB ports
    Stacked (2) Serial / (1) Parallel connectors
    Type "C" I/O Shield (Intel Caymen Compatible)
  • Regulatory
    FCC DoC (Declaration of Conformity)
    European CE (Declaration of Conformity)

Information published on is subject to change without notice.
Copyright © 2006, Tyan Computer Corporation. All Rights Reserved.