Transport GT20 (B3970) BIOS

  Current BIOS Revisions


Boot Disk - Refers to either a Windows 95 or Windows 98 boot disk. Any other type of boot disk might load memory resident programs which will interfer with the flash process. Make sure you hit the F5 key when the boot disk first starts running to make sure no other programs are loaded in the back ground without your knowledge.

Bios Flash Package -  Unzip the entire bios package to a seperate clean floppy.  Insure there are 3 files that are unpacked during the unzip process


Two separate diskettes are needed. The first diskette is the Windows 95/98 Boot Disk. The second diskette should contain the 3 files needed to flash the bios.  These files are provided when you unzip the bios flash package from the website.


At the A: prompt simply type in "
flash" and the rest will be handled by the files included in your download.






TYAN Transport GT20 (B3970)  BIOS V1.03
New features and Fixes :
* Added support for the TYAN LCM module
* Fixed a CMOS data error which may cause a boot fail,
   with "non-MP Processor" warning message
* Fixed Suse 10 can not shutdown automatically
* Update the VGA bios to V1.07.08
* Updated the Intel 82541 PXE ROM to V1.2.42



TYAN Transport GT20 (B3970)  BIOS V1.02
New features and Fixes :
* Added Endless PXE boot support
* Updated AMD CPU support
* Fixed DMI data can not updated using DMI tool
* Patched a smbus conflict if system is using a M3291
   SMDC card
* Fixed system hang if shadow RAM not enough for PXE
* Fixed a USB floppy error where pressing [F6] to load
   a driver would fail during a Windows installation
* Updated PWM duty cylce options



TYAN Transport GT20 (B3970)  BIOS V1.01
New features and Fixes :
* This is the first release BIOS

Information published on is subject to change without notice.
Copyright © 2006, TYAN COMPUTER CORPORATION. All Rights Reserved.