Thunder i7501 Xtreme (S2726) BIOS

  Current BIOS Revisions

Definitions:

Boot Disk - Refers to either a Windows 95 or Windows 98 boot disk. Any other type of boot disk might load memory resident programs which will interfer with the flash process. Make sure you hit the F5 key when the boot disk first starts running to make sure no other programs are loaded in the back ground without your knowledge.

Bios Flash Package -  Unzip the entire bios package to a seperate clean floppy.  Insure there are 3 files that are unpacked during the unzip process

Requirements:

Two separate diskettes are needed. The first diskette is the Windows 95/98 Boot Disk. The second diskette should contain the 3 files needed to flash the bios.  These files are provided when you unzip the bios flash package from the website.

Procedure:

At the A: prompt simply type in "
flash" and the rest will be handled by the files included in your download.

Date

BIOS

Description

11/25/03

2726_202

TYAN THUNDER i7501 Xtreme   BIOS V2.02
New features and Fixes :

* Support for 1M L3 cache (latest Intel microcode)
* Resolves 'power on after power fail' power on issue
* Compiled using AMI's latest 8.0 source code.
* Adds 9600/19200 baud rate for console redirect
* Resolves SCSI problems found in v201
* Add Adaptec 4.30 SCSI Firmware (for B0 stepping 7902) 

11/10/03

2726_201

TYAN THUNDER i7501 Xtreme   BIOS V2.01
New features and Fixes :

* Support for 1M L3 cache (latest Intel microcode)
* Resolves 'power on after power fail' power on issue
* Compiled using AMI's latest 8.0 source code
* Add Adaptec 4.20 SCSI Firmware 

04/23/03

2726_100

TYAN THUNDER i7501 Xtreme   BIOS V1.00
This is the first release BIOS for S2726.

Information published on TYAN.com is subject to change without notice.
Copyright © 2006, TYAN COMPUTER CORPORATION. All Rights Reserved.