Where can I get Tyan motherboard jumper settings for Pentium III CPUs 500MHz and above?
There is no need to worry about setting the correct jumper settings for a Pentium III 550MHz and 600MHz because the CPU multiplier is hardwired into the CPU and changing
jumper settings will not make any difference. The BIOS will automatically detect the correct CPU speed that is installed.
How do I bypass keyboard detection on systems with no keyboard?
On BX boards equipped with AMI BIOSs, enable the "Quick Boot" option in the Advanced Setup menu. This will bypass the keyboard check and allow you to
boot up without error.
Why is the video screen scrambled after entering the BIOS setup?
Some video cards ( Diamond FireGL AGP, Viper 330 AGP, or 3D Labs chip AGP cards) BIOS is not compatible with AMI WinBIOS. You can use text mode BIOS to fix the
video problem. This text mode BIOS is available from BIOS download site.
I got an error message "Memory conflict with AGP card" in Win95 device manager. What´s the solution?
This conflict is caused by the vxd file provided with Win95. This bug has been fixed in Win98.
What are the jumper settings for the 450MHz CPU?
Click here to for the S1830 Jumper Settings Chart.
My Wake-On LAN network burned out my power supply. What should I do?
You need to use a power supply with 800ma at +5VSB power line. This is because most Wake-On LAN network cards require +5V 750 mA in sleep mode. We recommend
our customer to purchase the ATX power supply with minimum 800 mA at +5V SB output to avoid over-current damage to the power supply.
How can I disable the keyboard detection in the BIOS v.1.12?
You need to enable the Quick Boot option in CMOS - then the BIOS will not check for a keyboard.
Where are the USB connectors on my S1830 motherboard?
The
USB ports are located between ISAslot1 and the edge of the motherboard. Pin 1 for both USB connectors are closest to the edge of the board.
What is JP14 for on the S1830S/SL Tsunami AT motherboard?
JP14 is a reserved jumper. Default is OPEN (no jumper).
