| System | Form Factor | 4U Rackmount/Tower |
| Chassis Model | FT48 |
| Dimension (D x W x H) | 27.5" x 16.8" x 6.9" (700 x 427 x 176mm) |
| Motherboard | S4985G3NR-SI |
| Board Dimension | MEB, 13"x16.2" (330x411mm) |
| Gross Weight | 50 kg |
| Front Panel | Buttons | (1) PWR / (1) RST / (1) ID |
| LEDs | (1) PWR / (1) HDD / (2) LAN / (1) ID |
| I/O Ports | (2) USB ports |
| External Drive Bay | Type / Q'ty | 3.5" Hot-Swap / (8) / (3) 5.25" device bays |
| Supported HDD Interface | SATA-II 3.0Gb/s |
| System Cooling Configuration | FAN | (6) 12cm fans |
| Air Duct | (1) Air duct |
| Power Supply | Type | ERP1U |
| Efficiency | PFC |
| Redundancy | 2+1 |
| Input Range | Full-range AC(100-240V) |
| Frequency | 60 Hertz |
| Output Watts | 1,140 Watts |
| Processor | Supported CPU Series | AMD 45nm Quad-Core Opteron 8300/8400 Series Processors (Barcelona / Shanghai / Istanbul) / Support AMD Dual Dynamic Power Management (DDPM) feature / Support AMD HyperTransport (HT1 and HT3) Technology |
| Socket Type / Q'ty | LGA 1207-pin / (4) |
| Thermal Design Power (TDP) wattage | 115W(Quad-Core) / 95W(Dual-Core) |
| System Bus | Up to 4.4 GT/s Hyper-Transport link support |
| Chipset | Chipset | NVIDIA NFP2200 / NFP2050 |
| Super I/O | Winbond W83627 |
| Memory | Supported DIMM Qty | (16) DIMM slots |
| DIMM Type / Speed | Registered ECC DDR2 / 800/667/533 |
| Capacity | Up to 128GB |
| Memory channel | 2 Channels per CPU |
| Memory voltage | 1.5V |
| Expansion Slots | PCI-E | (2) PCI-E x16 slots / (2) PCI-E x16 slots (w/ x4 link) |
| LAN | Port Q'ty | (3) |
| Controller | Intel 82541PI |
| PHY | Marvell 88E1111 |
| Graphic | Connector type | D-Sub 15-pin |
| Resolution | 1600x1200@60Hz |
| Chipset | XGI Z7 |
| Video RAM | 16MB |
| I/O Ports | USB | (4) ports (2 at front, 2 at rear) |
| COM | (1) DB-9 COM port |
| PS/2 | (1) PS/2 connector (for Keyboard and Mouse) |
| VGA | (1) D-Sub 15-pin port |
| RJ-45 | (3) ports |
| System Monitoring | Chipset | ADT7476 |
| Voltage | Monitors voltage for CPU, memory, chipset & power supply |
| Temperature | Monitors temperature for CPU & system environment |
| LED | Fan fail LED indicator / Over temperature warning indicator |
| Others | Chassis intrusion detection / Watchdog timer support |
| Server Management | Optional SMDC | M3291 IPMI 2.0 remote system management card |
| M3291 Feature | Renesas H8S2167 Baseboard Management Controller (BMC) / Supports remote power on/off and reset (IPMI over LAN) / Shared management NIC / Properitary card interface (2 x 25pin header) / SOL (remote serial console redirect over LAN) |
| BIOS | Brand / ROM size | Phoenix / 1MB |
| Feature | Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3 /PXE boot / ACPI 2.0 power management /Power on mode after power recovery / User-configurable H/W monitoring / Auto-configurable of hard disk types |
| Operating System | OS supported list | Please refer to our OS supported list. |
| Regulation | FCC (DoC) | Class A |
| CE (DoC) | Yes |
| Operating Environment | Operating Temp. | 10° C ~ 35° C (50° F~ 95° F) |
| Non-operating Temp. | - 40° C ~ 70° C (-40° F ~ 158° F) |
| In/Non-operating Humidity | 90%, non-condensing at 35° C |
| RoHS | RoHS 6/6 Complaint | Yes |
| Package Contains | Barebone | (1) FT48B4985-SI Barebone |
| Manual | (1) MB User's manual + (1) BB User's manual |
| Installation CD | (1) TYAN installation CD |
| Heatsink / Cooler | (4) CHSK-0250, 1207-pin CPU heatsinks |
| Rail kit | (1) CRAL-0070, sliding rail kit for KFT48 |
| Mounting Ear | (1) CRBK-0021, Rack mounting handle bracket, right / (1) CRBK-0020, Rack mounting handle bracket, left |
| Others | (1) HDD screw pack / (1) COTH-0180, Foot stand for chassis / (1) CFBZ-0140, FDD front cover for 5.25" dummy tray / (5) Long card holders with screws / (1) Security tab with screws |
| Cable | Power Cord | (3) CCBL-0310, US type power cords / (3) CCBL-0300, EU type power cords |
| Others | (1) CCBL-0441, FDD cable, 570mm |
| Optional accessories | SMDC IPMI Card | M3291 |
| Drive Tray | (1) CSTK-0060, 3 to 4 conversion HDD kit |
| Peripheral | (1) CFDD-0010, 3.5" FDD / (1) CLCM-0060, Standard 5.25" Drive Bay LCD Module kit |