support > Skip Navigation LinksHome > Support > Support Download(BIOS)
TYAN (GT24B5377)
Skip Navigation Links

| How to Flash |

TYAN makes no warranties to the usability of a BIOS on our website and are made available to the public on an "as-is" basis. Upgrading a BIOS without knowing the implications may cause serious adverse affects. Please do not upgrade a BIOS unless directed to do so by a qualified support technician. TYAN is not able to replace mis-used or damaged BIOS chips in the event of a BIOS flash failure. Please contact your dealer for replacements or warranty service.

Date Filename Version
2009/02/11 GT24-B5377_v104 v1.04

Problem Fix Description:

- Fixed an issue where if 4GB of memory + a PCI-E VGA card was installed, WinXP + SP2 would only show
  2GB of available memory
- Fixed an issue where the system would emit a POST beep error when a SMDC card was installed
- Updated the FAN failure detection functions
- Fixed an issue with the FAN failure LED
- Fixed an issue where system would hand during POST (13), if "Restore on AC Power Loss" is Power Off
  is set
- Fixed an issue where if you cleared CMOS, the RTC time would not be correct
- Fixed the CPU FAN Fail LED to ignore 2nd CPU if no CPU is present

2008/11/24 GT24-B5377_v103 v1.03

Problem Fix Description:

- Fixed a performance issue with onboard LAN
- Updated EIST module
- Updated the Chassis Intrusion functions
- Updated the Fan Failure options in the bios
- Updated CPU micro code
- Fixed an issue where Windows XP 32-bit + SP2 would only show 2GB of a total of 4GB of system
  memory if a 3rd party PCI-E VGA card was also installed
- Fixed an issue where the Intel(R) SpeedStep(tm) functions would not work if enabled

2008/10/27 M3296_GT24-B5377_R0.3 R03
Support Barebones: GT24 B5377

2008/05/30 v.1.02

Problem Fix Description: 

- Updated DMI information to report memory size

- Fixed an issue where the system will hang during POST (02) when rebooting from RHEL5 UP1 64-bit         - - Set "USB 2.0 Controller Mode" default bios setting to [HiSpeed]

- Updated CPU temperature display

- Updated MRC code to v1.2

- Updated VGA Option ROM to v1.09.07             

2008/04/07 GT24_B5377_v101 V1.01
New features and Fixes :
* Fixed an issue where the HWM disappears when a M3295-2 or M3296 are installed
* Added bios option to [Enabled/Disable] the LAN Option Rom
* Added bios option to reverse the PCI Bus Scan Order
* Updated CPU temperature reports to included PECI or Diode according to CPU support
* Updated CPU Micro Code
* Fixed a RHEL 5 Update 1 "Error attaching device data" error
* Updated embedded VGA Option ROM to v1.09.03
* Fixed a Console Redirect after BIOS POST [Boot Loader] issue
* Fixed system always boot to bios setup if pressing F1,F7, F11 in remote site
* Fixed a CentOS 5.1 failure to shut down properly issue
* Fixed a HDD size display error on the summary screen if HDD was larger than 1TB in size
* Changed the Crystal Beach / DMA to [Enable] by default

2008/01/22 GT24_B5377_v100 v1.00
New features and Fixes :
* This is the first release BIOS