support > Skip Navigation LinksHome > Support > Support Download(BIOS)
TYAN (GT24B5397)
Skip Navigation Links

| How to Flash |

TYAN makes no warranties to the usability of a BIOS on our website and are made available to the public on an "as-is" basis. Upgrading a BIOS without knowing the implications may cause serious adverse affects. Please do not upgrade a BIOS unless directed to do so by a qualified support technician. TYAN is not able to replace mis-used or damaged BIOS chips in the event of a BIOS flash failure. Please contact your dealer for replacements or warranty service.

Date Filename Version
2009/12/29 GT24-B5397_v107 v1.07

Problem Fix Description:

- Updated Auto FAN controls
- Fixed an issue where you could not boot from a remote client DVD-ROM device
- Fixed an issue where the CPU temperature would show an error in the Hardware Monitor menu
- Added a bios option to choose the VGA output method
- Fixed an issue where you could not boot to an OS CD when onboard VGA is disabled
- Fixed an issue where you could not access AHCI RAID Option ROM when using a PCIe VGA add-on card
- Added fan speed control for fan header J12
- Fixed an issue where USB FDD would not work if you disable onboard VGA
- Fixed an issue where the system would hang at POST when using a LSI 8208ELP card
- Updated USB settings to fix a LAN Option ROM load issue

2009/02/05 GT24-B5397_v105 v1.05

Problem Fix Description:

- Fixed the BIOS always add a BIOS SDR into the BMC
- Fixed DMI table of memory information is incorrect
- Fixed no boot when set Option ROM Placement "E000 by xxx"
- Fixed M3296 can't read SMBUS after S3 resume
- Fixed that enable snoop filter causes memory bandwidth low
- Fixed memory speed information of DMI is not correct
- Support nVidia Tesla graphic card
- Set S1 as the default ACPI Suspend Type
- Remove string of "for debug only" in the BIOS SETUP

2008/10/14 v.1.04

Problem Fix Description:


- Update CPU Micro Code

- Updated Boot support for SATA DVD devices

- Updated the FB-DIMM voltage support to allow auto detection between 1.5v and 1.8v

- Fixed an issue where the PECI information would be incorrect when used with IPMI functions

- Added bios option “Snoop Filter” to aid in some video performance issues

- Added Fan control as a IPMI setup item

- Fixed and issue where you couldn’t get the system to POST with 128GB of memory installed

- Fixed an issue where an Altera Stratix II card was not detected in the PCIe slot

- Added SATA Hot Plug support


2008/07/07 v.1.03
First release BIOS