support > Skip Navigation LinksHome > Support > Support Download(BIOS)
Thunder K8SD Pro (S2882-D)
Skip Navigation Links

| How to Flash |

TYAN makes no warranties to the usability of a BIOS on our website and are made available to the public on an "as-is" basis. Upgrading a BIOS without knowing the implications may cause serious adverse affects. Please do not upgrade a BIOS unless directed to do so by a qualified support technician. TYAN is not able to replace mis-used or damaged BIOS chips in the event of a BIOS flash failure. Please contact your dealer for replacements or warranty service.

Date Filename Version
2006/08/08 s2882-d_309 v3.09
TYAN  Thunder K8SD Pro (S2882-D) BIOS v3.09
New features and Fixes:
* Fixed a issue where the system will hang up after rebooting  from RedHat4U2 with dual core
   CPU with PowerNOW enabled
* Fixed a issue where the FAN1(J44) RPM will be moved up & down if fan power control set as [Enabled]
* Added the patch for Opteron CPU errata #122
* Added the support for M3291
* Added bios chip support for the SST49LF040B Rev.CA Flash-ROM
* Fixed the USB device might not be detected imtermittently after continual reboot
* Added AMD Errata # 131

2006/03/23 s2882-d_307 v3.07
TYAN Thunder K8SD Pro (S2882-D) V3.07
New features and Fixes :
* Fixed an issue where if Fan Spreed Control is set to [Enable] then the RPM is not stable
   around temperatures of 45°C or lower

2006/03/13 s2882-d_306 v3.06
TYAN Thunder K8SD Pro (S2882-D) V3.06
New features and Fixes :
* Corrected the BIOS datecode
* Updated ACPI S4 support
* Fixed an issue with Cherry Keyboards
* Fixed an issue with PXL-S30 SCSI Cards where the system would hang in the Option ROM
* Adjusted CPU temp detection method for more accurate CPU temperature display
* Updated CPU micro coding for new CPU support
* Updated the Sil3114 SATA Option ROM to v5.0.64

2005/10/31 s2882-d_305 v3.05
TYAN Thunder K8SD Pro (S2882-D) V3.05
New features and Fixes :
* Added support for 4 Sec delay to the Power Button Mode options
* Fixed an issue where Opteron CPU's were not correctly displaying their temperatures
* Added Opteron 280 CPU support
* Updated TSO support
* Fixed CPU display for Dual Core CPU L1 and L2 cache sizes
* Added BCM F1 option for SMDC of LAN

2005/09/06 2882-d_304 v3.04
TYAN Thunder K8SD Pro (S2882-D) V3.04
New features and Fixes :
* Updated SMBIOS information
* Fixed an issue where the system will hang during the POST with both the Adaptec SO-DIMM
   2015s Raid controller card and SMDC M3289 installed
* Fixed an issue where the Fan speed display wouldn't register correctily if fan power control
   was set to enabled
* Updated BIOSCheck 2.4 support
* Updated CPU temperature display
* Added support for SMBIOS Type 38 IMPI information
* Updated PowerNow! support for CG stepping CPU's
* Updated the boot loader console redirect support
* Changed PowerNow! minimal voltage to v1.35v
* Updated the lower FAN RPM registers for proper display
* Updated Opteron 254 PowerNow! support
* Updated IOMMU support

2005/06/28 s2882-d_303 v3.03
TYAN Thunder K8SD Pro (S2882-D) V3.03
New features and Fixes :
* Fixed an issue where the Peppercon's USB KVM would hang in use
* Implemented AMD's recommendations for DDR400 speed settings when large loads
   (more than 4 dimms) were used at once
* Added a Auto detect feature and addded support for the M3289 & M3290 SMDC cards
* Implemented AMD erratum 123
* Added a IPMI Over Lan selectable option in the BIOS [82551]/[BCM5704]
* Fixed an issue where Bank Interleaving was not functioning properly
* Fixed an issue where AMD PowerNow! was not working correctly
* Fixed an issue where the reported values of CPU1 Vcore & CPU2 Vcore were not correct
* Fixed an issue where the use of DualCore CPU's would not H/W Mem Remap correctly
   and would fail upon use

2005/05/09 s2882-d_302 v3.02
TYAN Thunder K8SD Pro (S2882-D) V3.02
New features and Fixes :
* This is the first release BIOS