|
Date |
Filename |
Version |
|
|
|
2008/11/12 |
S2912_v400
|
v4.00
|
Problem Fix Description:
- Updated AMD AGESA code to v3.3.0.0
- Fixed an issue where if you would install a 3rd party HTX card the system would hang during POST (Post Code 55)
- Set PowerNow! default setting to [Enable]
- Updated information that is shown during POST for CPU, memory and HT link speeds |
|
|
|
|
2008/07/07 |
S2912_v304a_beta.zip |
v.3.04a BETA
|
|
Problem Fix Description:
* Fixed an issue where if you would install a 3rd party HTX card the system would hang during POST (Post Code 55)
|
|
|
|
|
2008/03/28 |
S2912_v303
|
V3.03
|
New features and fixes :
* Updated CPU Micro Code
* Updated AMD AGESA code to v3.1.7.0
* Set "ECC mode" to "BASIC" as default bios setting |
|
|
|
|
2008/02/15 |
S2912_v302 |
v3.02
|
New features and Fixes :
* Updated AGESA code to v3.1.4.0
* Fixed an issue where the system would hang during POST (D2h) when using Dual Core CPU’s and
memory total size >= 4GB
* Fixed an issue where the system would hang during POST (FFh) during the first power on attempt
* Fixed an issue where if you used a USB CDROM you could not boot using the following configuration:
1) Legacy diskette A disable.
2) Quick boot disable.
3) Summary screen enable.
4) USB legacy enable.
5) Attached USB CD-ROM.
6) Attached SAS HD.
7) USB CD-ROM as first boot device.
* Improved memory performance by setting MTRR for above 4GB memory as cachable.
* Fixed an issue where the system would incorrectly read the MAC Address
* Set USB legacy support option to [Disable] by default to avoid RHEL 4.3 installation issue |
|
|
|
|
2008/01/02 |
S2912_v301
|
v3.01
|
New features and Fixes :
* Updated AGESA code to v3.1.2.0
* Changed "Processor Assisted Virtualization" default setting to [Disable] for improved Memory Performance.
* Changed "DRAM Bank Interleave" default setting to [Auto] for improved Memory Performance.
* Added support for endless PXE option
* Added Information which are Memory Clock , CPU Stepping, and LDT Freauency at POST
* Fixed an issue where the system always boots from USB device when present |
|
|
|
|
2007/08/14 |
S2912_v300 |
v3.00
|
|
TYAN Thunder n3600R (S2912) BIOS V3.00
New features and Fixes :
* Updated AGESA code to v3.1.1.0
|
|
|
|
|
2007/05/25 |
s2912_102
|
v1.02
|
|
TYAN Thunder n3600R (S2912) BIOS V1.02
New features and Fixes :
* Fixed an issue where you disable the USB controller and it would disable LAN1
* Updated nVidia SATA RAID Option ROM to v9.71
* Added supprot for 750GB SATA HD's
* Fixed an issue with Opteron 2214HE CPU's where the system wouldn't POST properly when installed
* Fixed an issue with Wake up from USB
* Updated IPMI boot option code to allow booting to CD/DVD, HDD(PCI BCV device), & removable devices
* Updated OPMA code
* Add 'Auto' selection in primary video setup
* Update bios to support ACPI 2.0
* Update NVMM to v4.062.14
* Updated CPU Micro Code
* Added the Opteron 2912 into the DMI string for TSM suppot
* Add Boot to BIOS, Boot to PXE function to SMDC function
* Add CPU present to SMDC function
* Update BCV handling code to save drive number for multiboot XP again, the previous patch
had been overrided by somewhere else
* Fixed an issue with the ATI ES1000 embedded VGA where it would cause ACPI S3 fail to resume screen |
|
|
|
|
2006/12/15 |
S2912_101 |
v1.01
|
|
TYAN Thunder n3600R (S2912) V1.01
New features and Fixes :
* Added Motherboard Model information in BIOS setup
* Updated BMC detection error message
* Added Chassis Intrussion fucntion into BIOS setup, correct chassis intrussion message
* Added support for both Tyan M3295 and 3rd party OPMA card
* Updated the default setting for HPET to [Enable]
* Fixed an issue where the HTX failed to be detected under Linux
* Fixed a Linux issue where the display would not appear correctly
* Fixed an issue with Fan 6 speed would not display properly
* Fixed the power recovery register tables
* Enabled wake up from legacy off and S5 from PCIE slots
* Updated CPU string display during the POST
* Fixed a conflict with the embedded ATI ES1000 and an add-on PCI-E Video card |
|
|
|
|
2006/11/01 |
s2912_100
|
v1.00
|
|
TYAN Thunder n3600R (S2912) V1.00
New features and Fixes :
* This is the first release BIOS |
|
|
|