support > Skip Navigation LinksHome > Support > Support Download(BIOS)
Toledo i3210W (S5211)
Skip Navigation Links

| How to Flash |

TYAN makes no warranties to the usability of a BIOS on our website and are made available to the public on an "as-is" basis. Upgrading a BIOS without knowing the implications may cause serious adverse affects. Please do not upgrade a BIOS unless directed to do so by a qualified support technician. TYAN is not able to replace mis-used or damaged BIOS chips in the event of a BIOS flash failure. Please contact your dealer for replacements or warranty service.

Date Filename Version
2009/08/18 S5211_v109 v1.09

Problem Fix Description:

- Fixed an issue where Ambient Temp 2 and 3 would show a high value when entering the Option ROM
- Updated Z9 VGA Option ROM to v1.09.10tt

2009/08/04 S5211_v108 v1.08

Problem Fix Description:

-Fixed a Hot Plug issue for eSATA devices
-Fixed an issue where the system would auto restart off an OS shut down when a M3296 is installed
-Updated CPU Micro Code
-Fixed an issue where GHOST would not work correctly
-Added SATA Hot Plug option for AHCI mode
-Fixed a LAN performance issue under RHEL3 UP9
-Fixed a FreeBSD 7.0 installation issue
-Fixed an IPMI memory reporting issue
-Fixed a Roamer KVM OS installation issue when using a USB ATAPI device

2009/02/20 S5211_v107 v1.07

Problem Fix Description:

- Fixed ASPM function can't disable North Bridge ASPM issue
- Fixed a FreeBSD 7.0 issue where the installation would halt at "BTX halted"
- Fixed a Roamer KVM compatiblity issue
- Fixed a USB DVD ROM not appearing in boot order issue
- Fixed an issue where installing 2 PCI-e devices at the same time would cause the system to reboot
- Fixed an issue where IPMI wouldn’t report the correct memory size

2008/11/04 S5211_v106 v.1.06

Problem Fix Description:

- Fixed a performance issue when 4GB sized DIMM modules were used.

2008/09/25 v.1.05
Problem Fix Description:
- Corrected the ACPI table for USB device definition
- Fixed an issue where the L2 cache size was incorrect
- Fixed an issue where the system would auto power cycle if a VGA card was added
- Add ASPM bios option to the advanced chipset control tab
- Fixed an issue 4x 1TB Hitachi HD’s setup as AHCI or RAID Mode could not detect the last HD
- Fixed an IMPI temperature display error issue
- Fixed an issue where LAN performance was not at the appropriate levels

2008/06/12 v.1.04

Problem Fix Description:


- Fixed an issue where some 3Ware Raid controller cards wouldn’t be able to load their Option ROM during POST

- Fixed an issue where you can use a DOS display screen to access a M3296 functions

- Fixed an issue where disabling the onboard VGA would cause an 0260 error during POST

- Updated embedded VGA Option ROM to v1.09.10

- Updated the  PECI CPU display information

- Fixed an issue where watchdog timer functions would fail during a Power ON state

- Fixed an issue where watchdog timer would cause the system to NO POST (98h) when enabled.

- Updated MRC to v1.41

2008/03/31 S5211_v103 V1.03
New features and fixes :
* Added an embedded VGA [Enable/Disable] option in the bios
* Added Post Delay Time in bios settings
* Changed boot option Endless Boot item to Main->Boot Features
* Fixed an iKVM remote monitor issue and display DVO mode issue (XGI Z9 Errata)
* Updated SMDC card post message errors
* Updated USB module

2008/02/05 S5211_v102 v1.02
New features and Fixes :
* Added the Endless Boot Setup Item to the bios
* Updated the M3296 response time for up to 30 Sec
* Updated the Intel SATA Option ROM to v7.6.0.1011
* Updated CPU Micro Code

2008/01/03 S5211_v101 v1.01
New features and Fixes :
* Updated CPU Support

2008/01/02 S5211_v100 v1.00
New features and Fixes :
* This is the first release BIOS