support > Skip Navigation LinksHome > Support > Support Download(BIOS)
Tempest i5100W (S5376W)
Skip Navigation Links

| How to Flash |

TYAN makes no warranties to the usability of a BIOS on our website and are made available to the public on an "as-is" basis. Upgrading a BIOS without knowing the implications may cause serious adverse affects. Please do not upgrade a BIOS unless directed to do so by a qualified support technician. TYAN is not able to replace mis-used or damaged BIOS chips in the event of a BIOS flash failure. Please contact your dealer for replacements or warranty service.



Date Filename Version
2009/01/13 S5376WAG2NR_v104 v1.04
*** IMPORTANT: FOR S5376WAG2NR ONLY! NOT COMPATIBLE WITH S5376G2NR!! ***
 
*** Please click here for S5376G2NR BIOS ***


Problem Fix Description:

- Fixed an issue where if 4GB of memory + a PCI-E VGA card was installed, WinXP + SP2 would only show
  2GB of available memory
- Fixed an issue where the system would emit a POST beep error when a SMDC card was installed
- Updated the FAN failure detection functions
- Fixed an issue with the FAN failure LED
- Fixed an issue where system would hand during POST (13), if "Restore on AC Power Loss" is Power Off is
  set
- Fixed an issue where if you cleared CMOS, the RTC time would not be correct
- Fixed the CPU FAN Fail LED to ignore 2nd CPU if no CPU is present

2008/09/11 S5376WAG2NR_v103.zip v.1.03

*** IMPORTANT: FOR S5376WAG2NR ONLY!  NOT COMPATIBLE WITH S5376G2NR!! ***

*** Please click here for S5376G2NR BIOS ***

Problem Fix Description:

 

- Fixed a low LAN performance issue

- Fixed an issue where EIST would not function if the option was enabled

- Updated the description and POST messages created by the Chassis Intrusion Detection feature

- Updated the description and the POST messages created by the FAN Fail Indicator feature

- Fixed an issue where the Audio device has yellow ! in the device manager

- Fixed an issue where the FSB speed information does not display correctly in the BIOS setup

- Added High Precision Event Timer support

- Updated CPU micro coding

- Updated PECI Hardware Monitoring in bios


2008/05/08 S5376WAG2NR_v102.zip v.1.02

*** IMPORTANT: FOR S5376WAG2NR ONLY!  NOT COMPATIBLE WITH S5376G2NR!! ***

*** Please click here for S5376G2NR BIOS ***

- Fixed an issue where the system will hang during POST (Post code 02) if you reboot from RHEL5.1 64-bit

- Set "USB 2.0 Controller Mode" fail safe default bios setting to [Hi Speed]

- Fixed an issue to allow the system  to always boot to bios setup by pressing F1, F7 or F11 from a remote site

- Adjusted the string of prefix’s for HD’s in BIOS SETUP

- Updated CPU micro code

- Fixed an issue under CentOS 5.1 where the system would fail to shut down properly

- Fixed and issue where the system would fail to auto wake up in S5 mode if trigged by a S1 event by LAN

- Fixed a HDD size display error in summary screen if HDD was larger than 1TB in size

- Updated DMI memory speed report error

- Modified CPU info report to maximum ratio when user changes CPU from low frequency to higher frequency

- Set the bios default setting for the Crystal Beach / DMA to [Enabled]

- Added support for the Audio chip ALC262VC2_GR

- Added support for 82573V and 82573L for LAN2

- Modified CPU temperature display rule to:

CPU0 Below Tmax :XXXX oC

CPU1 Below Tmax :XXXX oC

- Updated VGA Option ROM to v1.09.07

- Updated Intel MRC code to v1.2

- Added support for 82573V and 82573L for LAN2

 


2008/04/11 S5376WAG2NR_v101.zip v.1.01

*** IMPORTANT: FOR S5376WAG2NR ONLY! NOT COMPATIBLE WITH S5376G2NR!! ***

S5376WAG2NR    S5376WAG2NR_v101

* Updated VGA Option ROM to v1.09.03


2008/04/08 S5376WAG2NR_v100.zip v.1.00

*** IMPORTANT: FOR S5376WAG2NR ONLY! NOT COMPATIBLE WITH S5376G2NR!! ***

S5376WAG2NR    S5376WAG2NR_v100

* This is the first release Bios