support > Skip Navigation LinksHome > Support > Support Download(BIOS)
Tempest i5400PL (S5393)
Skip Navigation Links

| How to Flash |

TYAN makes no warranties to the usability of a BIOS on our website and are made available to the public on an "as-is" basis. Upgrading a BIOS without knowing the implications may cause serious adverse affects. Please do not upgrade a BIOS unless directed to do so by a qualified support technician. TYAN is not able to replace mis-used or damaged BIOS chips in the event of a BIOS flash failure. Please contact your dealer for replacements or warranty service.



Date Filename Version
2009/08/04 S5393_v105 v1.05

Problem Fix Description:

- Added NVIDIA Tesla support
- Add bios option to select primary VGA option
- Add bios option to halt when POST error is present
- Fixed an issue where there was a resource conflict for a 2nd Video card under WinXP

2008/12/09 S5393_v104b_beta v1.04b

Problem Fix Description:

- Added NVIDIA Telsa support
- Fixed an issue where there was a resource conflict for a 2nd Video card under WinXP

2008/11/13 S5393_v104 v1.04

Problem Fix Description:

- Fixed an issue where you could not resume from a S3 wait state under Linux
- Fixed an ACPI error under Ubuntu v8.04
- Fixed a DMI memory size error
- Fixed an issue where the BIOS always adds a SDR in the IPMI
- Fixed an issue where the PECI is incorrect when using BMC v1.03 firmware
- Fixed an issue where LAN2 would not function when resuming from a S3 wait state
- Added support for SATA DVD boot devices
- Updated the Hardware Monitor so that if CPU can’t support PECI, then it will make the CPU fan run at
  full speed
- Added S3 wait state support
- Fix an issue where if you disabled the Option ROM for a PCI slot it wouldn’t actually disable it
- Added bios POST function where you can press Hotkey and it will open a BIOS boot menu to allow you to
  chose a boot device
- Added bios POST function where you can press Hotkey and it would force a LAN PXE boot

2008/10/31 S5393_v103c_beta.zip v.1.03c BETA

Problem Fix Description:

 

- Fixed an issue where you could not resume from a S3 wait state under Linux

- Fixed an ACPI error under Ubuntu v8.04

- Fixed a DMI memory size error

- Fixed an issue where the BIOS always adds a SDR in the IPMI

- Fixed an issue where the PECI is incorrect when using BMC v1.03 firmware

- Fixed an issue where LAN2 would not function when resuming from a S3 wait state

- Added support for SATA DVD boot devices

- Updated the Hardware Monitor so that if CPU can’t support PECI, then it will make the CPU fan run at full speed

- Added S3 wait state support

- Fix an issue where if you disabled the Option ROM for a PCI slot it wouldn’t actually disable it

- Added bios POST function where you can press Hotkey <F11> and it will open a BIOS boot menu to allow you to chose a boot device

- Added bios POST function where you can press Hotkey <F12> and it would force a LAN PXE boot


2008/08/06 S5393_v103.zip v.1.03
Problem Fix Description:
 
-  Fixed a Code 12 error under Vista when using 2x 9600GT video cards
-  Fixed an issue where you couldn’t POST the system with a 9800X2 video card
-  Updated the PECI H/W Monitoring menu
-  Added a “Dual Graphic WinXP Support” bios to allow ATI Crossfire support when enabled
-  Fixed an issue where an Altera Stratrix II card was not seen when installed on a PCIe slot

2008/05/30 S5393_v102.zip v.1.02

Problem Fix Description:

 

- Added ability for the DMI Event log to be able to record on which DIMM slot had a Single-bit ECC error

- Updated the PECI Temperature reporting

- Updated the XGI Z9S for updated stepping

- Fix an issue where a  NVIDIA 9800X2 PCIe card would have a Code 12 error under Vista

- Fixed an issue where the M3296 iKVM remote console display wouldn’t function correctly under DOS


2008/04/11 S5393_v101 V1.01
New features and Fixes :
* Set Fan Count Limit to 500 PWM.
* Updated the support of the Warning LED functions
* Changed the Hardware Monitor display options when SMDC M3296 is present
* Added Endless Boot option                 
* Fixed some IRQ routing issues for specific nVidia VGA video cards
* Changed the default Fan failed limit to 510

2008/01/14 S5393_v100 v1.00
New features and Fixes :
* This is the first release BIOS