TYAN FT77CB7079 (B7079F77CV10HR-N) - 文件

Datasheet:
 DateFilenameVersion
2015/05/08DataSheet_FT77C-B7079v1.0
Manuals:
 DateFilenameVersion
2018/01/29FT77C-B7079_UG_V1.0pV1.0p
2014/09/09AST2400_UG_v1.0v1.0
2014/09/09FT77C-B7079_QIGv1.0
FRU:
 DateFilenameVersion
2016/11/28FT77C-B7079_FRU_v1.0bv1.0b
Drivers:
BIOS:
 DateFilenameVersion
2018/02/27FT77C-B7079V205v2.05

Description:
for CPU security hole Issue


- Update Micro Code from MEF406F1_0B000021 to MEF406F1_0B00002A
- 02. Update Micro Code from M6F306F2_0000003A to M6F306F2_0000003C
2017/04/05FT77C-B7079V204V2.04

Description:

- Update AMI code base to 5.011_MayanCity_0ACFL032
- Update Micro Code to MEF406F1_0B000021
- Set Wait for ESC disabled
2016/09/07FT77C-B7079V203v2.03

Description:

- Set setup "aspm" default value "Disabled"
- Solve "When choose MMIOH 4T it allocate above 4T" problem
2016/07/20FT77C-B7079V202V2.02

Description:

- Remove FRU warning message during Post time
2016/07/13FT77C-B7079V201V2.01

Description:

- Solve some PCI card did not detected in BMC web
- Add Synchronize FRU Manufacture and Product name of Type1 and Type2 of SMBIOS
- Optimiz Synchronize FRU module avoiding hang 79 when FRU is corruption
- Add suport /R1 /R2 parameters to flash BIOS from haswell to broadwell
2015/05/21FT77C-B7079V300V1.03.B10

Description:

- Disable the ACS support.
2015/04/15FT77C-B7079V200V1.02.B10

Description:

- Update AMI code label to 5.009_Grantley_0ACCB029.
- Fixed the PCIe component information abnormal issue.
2014/09/01FT77C-B7079V100V1.00.B10

Description:

- FT77C-B7079 BIOS initialized
Memory:
Memory Frequency:   
Vendor   Size   Voltage   Description(RoHS)
Vendor Part #   
Memory Chip /
Chip Part # /AMB Chip   
IPMI/iKVM firmware:
 DateFilenameVersion
2018/05/31AST2400_FT77CB7079_v901v9.01

Description:
- Remove useless bioscfg.conf item from webGUI
- Support V100 32G GPU
2018/01/30AST2400_FT77CB7079_v900v9.00

Description:
Fixed QOMD get SIGSEGV cause OOM issue
- Remove DIMM LED turn on function
- Fixed https mode JViewer can't install OS issue
- Remove service configure on WEBGUI
- Support V100 GPU
2017/06/21AST2400_FT77CB7079_v8.00v8.00

Description:
- Update netmon rule
- Add PSU fan/temp alert
- Fixed GPU upper critical abnormal issue
- Fixed PSU alert can't deassert after system reboot issue
- Add java certificate
- Update JDK to 1.7 to support jre8u131
- Extend SSL certificate valid date to 2024 year
- Add P100 12G GPU card support

2016/11/29AST2400_FT77CB7079_v7.00v7.00

Description:

- Fixed sometimes the garbage on screen
- Disable extended privilege on webGUI(admin privilege default on)
- Support P100/M40/P40 GPU card
- Fixed 1920*1200*32bpp resolution can't work via KVM
2016/07/26AST2400_FT77CB7079_v6.00v6.00

Description:

- Disable keep phy link up bit
2016/06/26AST2400_FT77CB7079_v5.00v5.00

Description:

- Add WDT, button, ACPI S0/S5 event SDR
- Record system power states change SEL
- Complete system restart cause command(button)
- Fixed Japanese keyboard some key can't be inputted issue
- Optimize get message from ME thread
- Fixed memory leak cause BMC crash issue
- Change power off command pressed PWRBTN from 5s to 6s
- Add power on retry on power on command
- Prevented creating of multiple instances of IPMIMain
- Fixed Java SOL abnormal under RHEL 7 issue
- Fixed BMC web port error message with Event log and Auto Video Recording function issue
2015/08/05AST2400_FT77CB7079_v3.00v3.00

Description:

- Fixed XHCI induced USB reset and causing KVM mount ISO effect slowly issue
- Fixed PSU alert abnormal issue
- Set default timezone to Etc/GMT+0
2015/03/24AST2400_FT77CB7079_v2.00v2.00

Description:

- Fixed DIMM temperature abnormal issue
- Fixed user privilege alert abnormal issue in Web-GUI
- Enable KVM function with anonymous user
- Complete setting threshold function in Web-GUI
- Synchronize system time from ME beforehand
- Complete SEL explain parse on web alert
- Fixed ECC SEL incomplete issue
- Add slot count to 15
2014/09/01AST2400_FT77CB7079_v1.00v1.00

Description:

- F77C-B7079 BMC initialized
HDD:
HDD/SSD Type:   
Vendor   Model   Form Factor   Interface   Capacity